Zh-l10n-2002 September 2002

zh-l10n-2002@lists.slat.org

12 participants
33 discussions

[Zh-l10n] tin-1.5.14 (0%, 1246 untranslated)

by Translation Project Robot

Hello, members of the Chinese (traditional) team at `zh-l10n(a)linux.org.tw'. This is a message from the Translation Project robot. I'm happy to announce that a new file, available as: > http://www.iro.umontreal.ca/contrib/po/domains/POT/tin-1.5.14.pot has been integrated in the central PO archives. The file should soon be made available in mirror sites as: > ftp://ftp.unex.es/pub/gnu-i18n/po/domains/POT/tin-1.5.14.pot > http://translation.sf.net/domains/POT/tin-1.5.14.pot > ftp://tiger.informatik.hu-berlin.de/pub/po/domains/POT/tin-1.5.14.pot None of its untranslated messages have been translated yet. Please consider taking its translation in charge for the Chinese (traditional) language. If you decide to do so, please get your team leader (if any) to inform the translation coordinator that you were assigned to `tin'. Once the translation is completed, send the result to the address given below, using the Subject line: > TP-Robot tin-1.5.14.zh_TW.po in your message header. You may contact either your team leader or me, if any question arises. The following HTML pages should also be updated by tomorrow. > http://www.iro.umontreal.ca/contrib/po/HTML/domain-tin.html > http://www.iro.umontreal.ca/contrib/po/HTML/team-zh_TW.html The Translation Project robot, in the name of your kind translation coordinator. mailto:translation@iro.umontreal.ca P.S. - You may find a copy (maybe not official) of the distribution as: > ftp://ftp.tin.org/pub/news/clients/tin/unstable/tin-1.5.14.tar.gz

21 years, 11 months

[Zh-l10n] Re: KOffice 更新..

by ycheng＠oss.sinica.edu.tw

commited, thank you. yc On Sat, Sep 28, 2002 at 07:11:41AM +0800, Chao-Hsiung Liao wrote: > 更新 > karbon.po > koffice.po > kspread.po > kword.po > 檔案都比較大，如果造成不便請多包涵。 You are Welcome ! > -- > by Chao-Hsiung Liao

21 years, 11 months

[Zh-l10n] bison-1.49c (0%, 134 untranslated)

by Translation Project Robot

Hello, members of the Chinese (traditional) team at `zh-l10n(a)linux.org.tw'. This is a message from the Translation Project robot. I'm happy to announce that a new file, available as: > http://www.iro.umontreal.ca/contrib/po/domains/POT/bison-1.49c.pot has been integrated in the central PO archives. The file should soon be made available in mirror sites as: > ftp://ftp.unex.es/pub/gnu-i18n/po/domains/POT/bison-1.49c.pot > http://translation.sf.net/domains/POT/bison-1.49c.pot > ftp://tiger.informatik.hu-berlin.de/pub/po/domains/POT/bison-1.49c.pot None of its untranslated messages have been translated yet. Please consider taking its translation in charge for the Chinese (traditional) language. If you decide to do so, please get your team leader (if any) to inform the translation coordinator that you were assigned to `bison'. Once the translation is completed, send the result to the address given below, using the Subject line: > TP-Robot bison-1.49c.zh_TW.po in your message header. You may contact either your team leader or me, if any question arises. The following HTML pages should also be updated by tomorrow. > http://www.iro.umontreal.ca/contrib/po/HTML/domain-bison.html > http://www.iro.umontreal.ca/contrib/po/HTML/team-zh_TW.html The Translation Project robot, in the name of your kind translation coordinator. mailto:translation@iro.umontreal.ca P.S. - You may find a copy (maybe not official) of the distribution as: > ftp://alpha.gnu.org/gnu/bison/bison-1.49c.tar.bz2

21 years, 11 months

[Zh-l10n] jpilot-0.99.2 (97%, 3 untranslated)

by Translation Project Robot

Hello, members of the Chinese (traditional) team at `zh-l10n(a)linux.org.tw'. This is a message from the Translation Project robot. I'm happy to announce that a new file, available as: > http://www.iro.umontreal.ca/contrib/po/teams/PO/zh_TW/jpilot-0.99.2.zh_TW.po has been integrated in the central PO archives, and is now kept with all other accepted Chinese (traditional) translations. The file should soon be made available in mirror sites as: > ftp://ftp.unex.es/pub/gnu-i18n/po/teams/PO/zh_TW/jpilot-0.99.2.zh_TW.po > http://translation.sf.net/teams/PO/zh_TW/jpilot-0.99.2.zh_TW.po > ftp://tiger.informatik.hu-berlin.de/pub/po/teams/PO/zh_TW/jpilot-0.99.2.zh_TW.po In this file, 333 messages have been translated already, accounting for 97% of the original text size (in raw bytes). Still, 3 messages need to be attended to. Nobody in your team is currently assigned to the domain 'jpilot'. The team leader (if any) should inform the translation coordinator of who will become responsible for it. Please translate the remaining messages for the benefit of users of the Chinese (traditional) language. Once the translation completed, send the result to the address given below, using the Subject line: > TP-Robot jpilot-0.99.2.zh_TW.po in your message header. You may contact either your team leader or me, if any question arises. In the meantime, this PO file has been submitted to the maintainer of programs using the textual domain `jpilot'. Thanks! The following HTML pages should also be updated by tomorrow. > http://www.iro.umontreal.ca/contrib/po/HTML/domain-jpilot.html > http://www.iro.umontreal.ca/contrib/po/HTML/team-zh_TW.html The Translation Project robot, in the name of your kind translation coordinator. mailto:translation@iro.umontreal.ca P.S. - You may find a copy (maybe not official) of the distribution as: > http://jpilot.org/jpilot-0.99.2.tar.gz

21 years, 11 months

[Zh-l10n] aegis-4.6 (100%, 0 untranslated)

by Translation Project Robot

21 years, 11 months

[Zh-l10n] anubis-3.4.9 (0%, 170 untranslated)

by Translation Project Robot

Hello, members of the Chinese (traditional) team at `zh-l10n(a)linux.org.tw'. This is a message from the Translation Project robot. I'm happy to announce that a new file, available as: > http://www.iro.umontreal.ca/contrib/po/domains/POT/anubis-3.4.9.pot has been integrated in the central PO archives. The file should soon be made available in mirror sites as: > ftp://ftp.unex.es/pub/gnu-i18n/po/domains/POT/anubis-3.4.9.pot > http://translation.sf.net/domains/POT/anubis-3.4.9.pot > ftp://tiger.informatik.hu-berlin.de/pub/po/domains/POT/anubis-3.4.9.pot None of its untranslated messages have been translated yet. Please consider taking its translation in charge for the Chinese (traditional) language. If you decide to do so, please get your team leader (if any) to inform the translation coordinator that you were assigned to `anubis'. Once the translation is completed, send the result to the address given below, using the Subject line: > TP-Robot anubis-3.4.9.zh_TW.po in your message header. You may contact either your team leader or me, if any question arises. The following HTML pages should also be updated by tomorrow. > http://www.iro.umontreal.ca/contrib/po/HTML/domain-anubis.html > http://www.iro.umontreal.ca/contrib/po/HTML/team-zh_TW.html The Translation Project robot, in the name of your kind translation coordinator. mailto:translation@iro.umontreal.ca P.S. - You may find a copy (maybe not official) of the distribution as: > http://unc.dl.sourceforge.net/sourceforge/anubis/anubis-3.4.9.tar.gz

21 years, 11 months

[Zh-l10n] gpsdrive-1.28pre2 (0%, 284 untranslated)

by Translation Project Robot

Hello, members of the Chinese (traditional) team at `zh-l10n(a)linux.org.tw'. This is a message from the Translation Project robot. I'm happy to announce that a new file, available as: > http://www.iro.umontreal.ca/contrib/po/domains/POT/gpsdrive-1.28pre2.pot has been integrated in the central PO archives. The file should soon be made available in mirror sites as: > ftp://ftp.unex.es/pub/gnu-i18n/po/domains/POT/gpsdrive-1.28pre2.pot > http://translation.sf.net/domains/POT/gpsdrive-1.28pre2.pot > ftp://tiger.informatik.hu-berlin.de/pub/po/domains/POT/gpsdrive-1.28pre2.pot None of its untranslated messages have been translated yet. Please consider taking its translation in charge for the Chinese (traditional) language. If you decide to do so, please get your team leader (if any) to inform the translation coordinator that you were assigned to `gpsdrive'. Once the translation is completed, send the result to the address given below, using the Subject line: > TP-Robot gpsdrive-1.28pre2.zh_TW.po in your message header. You may contact either your team leader or me, if any question arises. The following HTML pages should also be updated by tomorrow. > http://www.iro.umontreal.ca/contrib/po/HTML/domain-gpsdrive.html > http://www.iro.umontreal.ca/contrib/po/HTML/team-zh_TW.html The Translation Project robot, in the name of your kind translation coordinator. mailto:translation@iro.umontreal.ca P.S. - You may find a copy (maybe not official) of the distribution as: > http://gpsdrive.kraftvoll.at/gpsdrive-1.28pre2.tar.gz

21 years, 11 months

[Zh-l10n] K3b po檔~

by SiongUi Te

as title~ 請問一下為什麼最近在下都連不上翻譯計畫網頁謝謝! # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: k3b 0.7\n" "POT-Creation-Date: 2002-08-25 03:04+0200\n" "PO-Revision-Date: 2002-08-30 01:57+0800\n" "Last-Translator: SiongUi Te <siongui(a)yahoo.com.tw>\n" "Language-Team: Chinese (traditional)<zh-l10n(a)linux.org.tw>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" #: audio/audiolistview.cpp:88 rip/k3bcdview.cpp:93 msgid "No." msgstr "無" #: audio/audiolistview.cpp:89 msgid "Artist (CD-Text)" msgstr "" #: audio/audiolistview.cpp:90 msgid "Title (CD-Text)" msgstr "標題(CD-文字)" #: audio/audiolistview.cpp:91 audio/k3baudiotrackdialog.cpp:296 #: cdinfo/k3bdiskinfoview.cpp:290 k3baudioplayer.cpp:115 #: rip/k3bripperwidget.cpp:90 msgid "Length" msgstr "長度" #: audio/audiolistview.cpp:92 msgid "Pregap" msgstr "" #: audio/audiolistview.cpp:93 audio/k3baudiotrackdialog.cpp:293 #: k3baudioplayer.cpp:114 rip/k3bripperwidget.cpp:89 msgid "Filename" msgstr "檔名" #: audio/audiolistview.cpp:106 data/k3bdatadirtreeview.cpp:268 #: data/k3bdatafileview.cpp:228 msgid "Properties..." msgstr "性質..." #: audio/audiolistview.cpp:110 msgid "Play" msgstr "播放" #: audio/audiolistview.cpp:113 msgid "Play all" msgstr "播放全部" #: audio/audiolistview.cpp:402 msgid "Use drag'n'drop to add audio files to the project." msgstr "使用拖曳和放開來把audio檔案加到專案裡" #: audio/audiolistview.cpp:404 data/k3bdatafileview.cpp:356 msgid "After that press the burn button to write the CD." msgstr "在那之後請按燒錄按鈕來燒錄CD" #: audio/k3baudioburndialog.cpp:60 data/k3bdataburndialog.cpp:113 #: mixed/k3bmixedburndialog.cpp:42 msgid "Burning" msgstr "燒錄中" #: audio/k3baudioburndialog.cpp:61 msgid "CD-text" msgstr "CD-文字" #: audio/k3baudioburndialog.cpp:70 msgid "Gimmicks" msgstr "" #: audio/k3baudioburndialog.cpp:73 msgid "Hide first track" msgstr "隱藏第一個軌道" #: audio/k3baudioburndialog.cpp:79 cdcopy/k3bcdcopydialog.cpp:119 #: data/k3bdataburndialog.cpp:116 data/k3bisoimagewritingdialog.cpp:238 #: mixed/k3bmixedburndialog.cpp:60 option/k3bburningoptiontab.cpp:188 msgid "Advanced" msgstr "進階" #: audio/k3baudioburndialog.cpp:94 msgid "Create CD-TEXT entries" msgstr "" #: audio/k3baudioburndialog.cpp:95 msgid "Write in 'disk at once' mode" msgstr "以'disk at once'模式來燒錄" #: audio/k3baudioburndialog.cpp:96 msgid "Decode audio files while writing" msgstr "一邊燒錄的時候一邊解碼audio檔案" #: audio/k3baudioburndialog.cpp:97 cdcopy/k3bcdcopydialog.cpp:159 #: data/k3bdataburndialog.cpp:286 data/k3bisoimagewritingdialog.cpp:78 msgid "Only simulate the writing process" msgstr "只模擬燒錄過程" #: audio/k3baudioburndialog.cpp:98 msgid "Hide the first track in the first pregap" msgstr "" #: audio/k3baudioburndialog.cpp:99 cdcopy/k3bcdcopydialog.cpp:161 #: data/k3bdataburndialog.cpp:289 msgid "Remove images from harddisk when finished" msgstr "當燒錄完成的時候移除映象檔" #: audio/k3baudioburndialog.cpp:100 audio/k3baudioburndialog.cpp:101 #: audio/k3baudioburndialog.cpp:102 audio/k3baudioburndialog.cpp:103 #: audio/k3baudioburndialog.cpp:104 audio/k3baudioburndialog.cpp:105 #: audio/k3baudioburndialog.cpp:106 msgid "CD-TEXT information field" msgstr "" #: audio/k3baudioburndialog.cpp:110 msgid "" "If this option is checked K3b uses some otherwise unused space on the " "audio CD to store additional information, like the artist or the CD title." "CD-TEXT is an extension to the audio CD standard introduced by Sony.CD-" "TEXT will only be usable on CD players that support this extension (mostly " "car CD players).Since a CD-TEXT enhanced CD will work in any CD player it " "is never a bad idea to enable this (if you specified the data)." msgstr "" #: audio/k3baudioburndialog.cpp:117 msgid "" "If this option is checked K3b will write the CD in 'disk at once mode' as " "compared to 'track at once' (TAO).It is always recommended to use DAO " "where possible.Caution: Track pregaps other than 2 seconds long " "are only supported in DAO mode." msgstr "" #: audio/k3baudioburndialog.cpp:122 msgid "" "If this option is checked K3b will decode the audio files in memory while " "writing. This saves space on the harddisk and time.Caution: Make " "sure your system is able to decode the files fast enough to avoid buffer " "underruns." msgstr "" #: audio/k3baudioburndialog.cpp:126 cdcopy/k3bcdcopydialog.cpp:182 #: data/k3bdataburndialog.cpp:304 msgid "It is recommended to try a simulation first." msgstr "建議在燒錄之前先模擬" #: audio/k3baudioburndialog.cpp:127 msgid "" "If this option is checked, K3b will perform all writing steps with the " "laser turned off.This is useful, for example, to test a higher writing " "speed or if your system is able to write on-the-fly." msgstr "" #: audio/k3baudioburndialog.cpp:131 msgid "" "If this option is checked K3b will hide the first track.The " "audio CD standard uses pregaps before every track on the CD. By default " "these last for 2 seconds and are silent. In DAO mode it is possible to have " "longer pregaps that contain some audio. In this case the first pregap will " "contain the complete first track.You will need to seek back from the " "beginning of the CD to listen to the first track. Try it, it's quite amusing!" msgstr "" #: audio/k3baudioburndialog.cpp:138 cdcopy/k3bcdcopydialog.cpp:183 msgid "" "If this option is checked K3b will remove any created images after the " "writing has finished.Uncheck this if you want to keep the images." msgstr "" "如果這個選項被勾選,K3b將會在燒錄完成時移除任何被建立的映象檔." "如果你想保留映象檔的話請不要勾選" #: audio/k3baudioburndialog.cpp:222 data/k3bdataburndialog.cpp:255 #: data/k3bisoimagewritingdialog.cpp:216 msgid "Disk at once" msgstr "" #: audio/k3baudioburndialog.cpp:225 msgid "Simulate Writing" msgstr "模擬燒錄" #: audio/k3baudioburndialog.cpp:228 cdcopy/k3bcdcopydialog.cpp:84 #: data/k3bdataburndialog.cpp:243 msgid "Writing on the fly" msgstr "" #: audio/k3baudioburndialog.cpp:231 msgid "Remove image files" msgstr "移除映象檔" #: audio/k3baudioburndialog.cpp:258 msgid "Write CD-text" msgstr "" #: audio/k3baudioburndialog.cpp:260 msgid "&Disk ID:" msgstr "" #: audio/k3baudioburndialog.cpp:261 audio/k3baudiotrackdialog.cpp:220 msgid "&Message:" msgstr "訊息(&M)" #: audio/k3baudioburndialog.cpp:262 msgid "&UPC EAN:" msgstr "" #: audio/k3baudioburndialog.cpp:263 audio/k3baudiotrackdialog.cpp:225 msgid "&Arranger:" msgstr "" #: audio/k3baudioburndialog.cpp:264 audio/k3baudiotrackdialog.cpp:224 msgid "&Songwriter:" msgstr "" #: audio/k3baudioburndialog.cpp:265 audio/k3baudiotrackdialog.cpp:221 msgid "&Performer:" msgstr "" #: audio/k3baudioburndialog.cpp:266 audio/k3baudiotrackdialog.cpp:222 msgid "&Title:" msgstr "標題(&T)" #: audio/k3baudioburndialog.cpp:269 msgid "International Standard Recording Code" msgstr "" #: audio/k3baudioburndialog.cpp:325 msgid "Not enough space in temporary directory." msgstr "暫存目錄沒有足夠空間" #: audio/k3baudiodoc.cpp:203 msgid "Only MP3, Ogg Vorbis and WAV audio files are supported." msgstr "只支援MP3,Ogg Vorbis跟WAV這些audio檔案" #: audio/k3baudiodoc.cpp:204 msgid "Wrong File Format" msgstr "錯誤的檔案格式" #: audio/k3baudiodoc.cpp:880 data/k3bdatadoc.cpp:965 msgid "Not found" msgstr "找不到" #: audio/k3baudiodoc.cpp:880 data/k3bdatadoc.cpp:965 msgid "Could not find the following files:" msgstr "找不到下列的檔案:" #: audio/k3baudiojob.cpp:184 data/k3bdatajob.cpp:652 #: data/k3bisoimagejob.cpp:454 msgid "Fixating" msgstr "" #: audio/k3baudiojob.cpp:190 data/k3bdatajob.cpp:658 #: data/k3bisoimagejob.cpp:460 msgid "Writing pregap" msgstr "" #: audio/k3baudiojob.cpp:193 data/k3bdatajob.cpp:661 #: data/k3bisoimagejob.cpp:463 msgid "Performing OPC" msgstr "" #: audio/k3baudiojob.cpp:196 data/k3bdatajob.cpp:664 #: data/k3bisoimagejob.cpp:466 msgid "Sending CUE sheet" msgstr "" #: audio/k3baudiojob.cpp:199 data/k3bdatajob.cpp:667 #: data/k3bisoimagejob.cpp:469 msgid "Enabled BURN-Proof" msgstr "啟動 BURN-Proof" #: audio/k3baudiojob.cpp:211 audio/k3baudiojob.cpp:258 msgid "Writing track %1: '%2'" msgstr "燒錄軌道 %1: '%2'" #: audio/k3baudiojob.cpp:267 msgid "Writing canceled by user." msgstr "使用者取消燒錄" #: audio/k3baudiojob.cpp:285 data/k3bdatajob.cpp:1133 #: data/k3bisoimagejob.cpp:342 data/k3bisoimagejob.cpp:519 #: data/k3bisoimagejob.cpp:567 k3bblankingjob.cpp:129 msgid "Could not unlock CD drive." msgstr "" #: audio/k3baudiojob.cpp:339 msgid "Waiting for all tracks' length to be calculated." msgstr "正在計算所有的軌道長度,請稍等." #: audio/k3baudiojob.cpp:348 msgid "All tracks' length ready." msgstr "所有的軌道長度都已準備就緒." #: audio/k3baudiojob.cpp:379 msgid "On the fly writing not supported with cdrecord." msgstr "" #: audio/k3baudiojob.cpp:383 msgid "Hiding first track not supported by cdrecord" msgstr "cdrecord不支援隱藏第一個軌道" #: audio/k3baudiojob.cpp:386 msgid "CD-TEXT not supported by cdrecord." msgstr "" #: audio/k3baudiojob.cpp:396 audio/k3baudiojob.cpp:397 msgid "Buffering files" msgstr "正在緩衝檔案" #: audio/k3baudiojob.cpp:414 cdcopy/k3bcdcopyjob.cpp:533 #: option/k3boptiondialog.cpp:119 msgid "Writing" msgstr "燒錄中" #: audio/k3baudiojob.cpp:415 data/k3bdatajob.cpp:302 #: data/k3bisoimagejob.cpp:143 msgid "Preparing write process..." msgstr "正在準備燒錄程序..." #: audio/k3baudiojob.cpp:451 msgid "Internal error: No module. Please report!" msgstr "內部錯誤:沒有模組.請回報!" #: audio/k3baudiojob.cpp:471 #, c-format msgid "Buffering file %1" msgstr "正在緩衝檔案 %1" #: audio/k3baudiojob.cpp:478 #, c-format msgid "Could not open buffer file %1" msgstr "不能打開緩衝檔案 %1" #: audio/k3baudiojob.cpp:540 msgid "Error while streaming file" msgstr "" #: audio/k3baudiojob.cpp:556 msgid "Written buffer file for %1 to %2" msgstr "" #: audio/k3baudiojob.cpp:560 #, c-format msgid "Error while buffering track %1" msgstr "當緩衝軌道 %1 時發生了錯誤" #: audio/k3baudiojob.cpp:584 cdcopy/k3bcdcopyjob.cpp:166 #: cdcopy/k3bcdcopyjob.cpp:266 cdcopy/k3bcdcopyjob.cpp:346 #: data/k3bisoimagejob.cpp:255 msgid "cdrdao executable not found." msgstr "找不到可執行的cdrdao" #: audio/k3baudiojob.cpp:591 msgid "Writing TOC-file" msgstr "" #: audio/k3baudiojob.cpp:596 msgid "Could not write correct TOC-file." msgstr "" #: audio/k3baudiojob.cpp:673 cdcopy/k3bcdcopyjob.cpp:207 #: cdcopy/k3bcdcopyjob.cpp:295 cdcopy/k3bcdcopyjob.cpp:377 #: data/k3bisoimagejob.cpp:318 msgid "Could not start cdrdao!" msgstr "不能啟動 cdrdao" #: audio/k3baudiojob.cpp:682 audio/k3baudiojob.cpp:797 #: cdcopy/k3bcdcopyjob.cpp:367 data/k3bdatajob.cpp:427 #: data/k3bisoimagejob.cpp:239 data/k3bisoimagejob.cpp:324 #, c-format msgid "Starting simulation at %1x speed..." msgstr "開使以%1x的速度模擬..." #: audio/k3baudiojob.cpp:684 audio/k3baudiojob.cpp:799 data/k3bdatajob.cpp:429 #: data/k3bisoimagejob.cpp:241 data/k3bisoimagejob.cpp:326 #, c-format msgid "Starting recording at %1x speed..." msgstr "正在以 %1x 的速度記錄中..." #: audio/k3baudiojob.cpp:693 data/k3bdatajob.cpp:136 data/k3bdatajob.cpp:324 #: data/k3bisoimagejob.cpp:160 k3bblankingjob.cpp:59 msgid "cdrecord executable not found." msgstr "找不到可執行的 cdrecord" #: audio/k3baudiojob.cpp:758 msgid "Not all files have been buffered." msgstr "並非所有的檔案都被緩衝." #: audio/k3baudiojob.cpp:789 data/k3bdatajob.cpp:159 #: data/k3bisoimagejob.cpp:233 k3bblankingjob.cpp:111 msgid "Could not start cdrecord!" msgstr "不能啟動cdrecord!" #: audio/k3baudiojob.cpp:812 audio/k3baudiojob.cpp:852 #: data/k3bisoimagejob.cpp:537 msgid "Simulation successfully completed" msgstr "成功地完成模擬" #: audio/k3baudiojob.cpp:814 audio/k3baudiojob.cpp:854 #: data/k3bisoimagejob.cpp:539 msgid "Writing successfully completed" msgstr "燒錄順利地完成" #: audio/k3baudiojob.cpp:821 k3bblankingjob.cpp:159 msgid "cdrecord returned an error!" msgstr "cdrecord傳回了錯誤!" #: audio/k3baudiojob.cpp:822 audio/k3baudiojob.cpp:862 #: cdcopy/k3bcdcopyjob.cpp:239 cdcopy/k3bcdcopyjob.cpp:322 #: cdcopy/k3bcdcopyjob.cpp:408 data/k3bisoimagejob.cpp:547 msgid "Error handling not implemented yet!" msgstr "尚未有錯誤處理!" #: audio/k3baudiojob.cpp:823 audio/k3baudiojob.cpp:863 #: cdcopy/k3bcdcopyjob.cpp:240 cdcopy/k3bcdcopyjob.cpp:323 #: cdcopy/k3bcdcopyjob.cpp:409 data/k3bisoimagejob.cpp:548 msgid "Please send an email to the author with the last output..." msgstr "請將最後的輸出用email送給作者..." #: audio/k3baudiojob.cpp:832 msgid "cdrecord did not exit cleanly!" msgstr "" #: audio/k3baudiojob.cpp:861 cdcopy/k3bcdcopyjob.cpp:238 #: cdcopy/k3bcdcopyjob.cpp:321 cdcopy/k3bcdcopyjob.cpp:407 msgid "cdrdao returned an error!" msgstr "cdrdao傳回了錯誤!" #: audio/k3baudiojob.cpp:872 cdcopy/k3bcdcopyjob.cpp:246 #: cdcopy/k3bcdcopyjob.cpp:329 cdcopy/k3bcdcopyjob.cpp:415 #: data/k3bisoimagejob.cpp:557 msgid "cdrdao did not exit cleanly!" msgstr "" #: audio/k3baudiojob.cpp:907 msgid "Removing temporary files!" msgstr "正在移除暫存檔案!" #: audio/k3baudiojob.cpp:912 #, c-format msgid "Removing file %1" msgstr "正在移除檔案 %1" #: audio/k3baudiotrackdialog.cpp:42 msgid "Audio Track Properties" msgstr "" #: audio/k3baudiotrackdialog.cpp:112 msgid "%1 kb" msgstr "" #: audio/k3baudiotrackdialog.cpp:187 msgid "&Pregap:" msgstr "" #: audio/k3baudiotrackdialog.cpp:192 msgid "Pr&eemphasis" msgstr "" #: audio/k3baudiotrackdialog.cpp:193 msgid "&Copy protected" msgstr "" #: audio/k3baudiotrackdialog.cpp:195 audio/k3baudiotrackdialog.cpp:348 #: option/k3bburningoptiontab.cpp:74 option/k3bburningoptiontab.cpp:285 msgid "Seconds" msgstr "秒" #: audio/k3baudiotrackdialog.cpp:196 option/k3bburningoptiontab.cpp:75 msgid "Frames" msgstr "" #: audio/k3baudiotrackdialog.cpp:223 msgid "&ISRC:" msgstr "" #: audio/k3baudiotrackdialog.cpp:283 msgid "File Info" msgstr "檔案資訊" #: audio/k3baudiotrackdialog.cpp:295 data/k3bdatafileview.cpp:59 #: rip/k3bcdview.cpp:97 msgid "Size" msgstr "大小" #: audio/k3baudiotrackdialog.cpp:298 msgid "0.0 MB" msgstr "" #: audio/k3baudiotrackdialog.cpp:301 msgid "0:0:0" msgstr "" #: audio/k3baudiotrackdialog.cpp:327 msgid "CD-Text" msgstr "CD-文字" #: k3b.cpp:100 msgid "K3b - The CD Kreator" msgstr "" #: k3b.cpp:160 msgid "&Burn..." msgstr "燒錄...(&B)" #: k3b.cpp:162 msgid "E&xport..." msgstr "" #: k3b.cpp:165 msgid "&New Project" msgstr "新專案(&N)" #: k3b.cpp:166 msgid "New &Audio Project" msgstr "新的Audio專案(&A)" #: k3b.cpp:168 msgid "New &Data Project" msgstr "新的資料專案(&D)" #: k3b.cpp:170 msgid "New &Mixed Mode Project" msgstr "新的混合模式專案(&M)" #: k3b.cpp:178 msgid "&Add Files..." msgstr "加入檔案...(&A)" #: k3b.cpp:181 msgid "Show Directories" msgstr "顯示目錄" #: k3b.cpp:184 msgid "Show Audio Player" msgstr "" #: k3b.cpp:187 msgid "&Blank CD-RW..." msgstr "清除CD-RW...(&B)" #: k3b.cpp:189 msgid "&Encode Video..." msgstr "" #: k3b.cpp:191 msgid "&Write ISO Image..." msgstr "燒錄ISO映象檔...(&W)" #: k3b.cpp:194 msgid "&Copy CD..." msgstr "複製CD...(&C)" #: k3b.cpp:197 msgid "K3b &Setup" msgstr "" #: k3b.cpp:201 msgid "Creates a new project" msgstr "建立新專案" #: k3b.cpp:202 msgid "Creates a new data project" msgstr "建立新的資料專案" #: k3b.cpp:203 msgid "Creates a new audio project" msgstr "建立新的audio專案" #: k3b.cpp:204 msgid "Opens CD-blanking dialog" msgstr "打開CD清除對話框" #: k3b.cpp:205 msgid "Opens an existing project" msgstr "打開已存在的專案" #: k3b.cpp:206 msgid "Opens a recently used file" msgstr "打開最近使用的檔案" #: k3b.cpp:207 msgid "Saves the actual project" msgstr "儲存目前的專案" #: k3b.cpp:208 msgid "Saves the actual project as..." msgstr "儲存目前的專案為..." #: k3b.cpp:209 msgid "Closes the actual project" msgstr "關閉目前的專案" #: k3b.cpp:210 msgid "Quits the application" msgstr "離開應用程式" #: k3b.cpp:212 msgid "Enables/disables the toolbar" msgstr "啟動/關閉工具列" #: k3b.cpp:213 msgid "Enables/disables the statusbar" msgstr "啟動/關閉狀態列" #: k3b.cpp:249 msgid "Workspace" msgstr "" #: k3b.cpp:268 msgid "Current Projects" msgstr "目前專案" #: k3b.cpp:298 msgid "K3b Dir View" msgstr "k3b目錄檢視" #: k3b.cpp:310 msgid "K3b Audio Player" msgstr "" #: k3b.cpp:383 k3b.cpp:583 k3b.cpp:596 msgid "Opening file..." msgstr "打開檔案..." #: k3b.cpp:400 msgid "Could not open document!" msgstr "無法打開文件!" #: k3b.cpp:400 msgid "Error!" msgstr "錯誤!" #: k3b.cpp:548 msgid "%1 has unsaved data." msgstr "%1有未儲存的資料." #: k3b.cpp:549 msgid "Closing project..." msgstr "正在關閉專案..." #: k3b.cpp:576 msgid "Creating new document..." msgstr "建立新的文件..." #: k3b.cpp:586 k3b.cpp:645 msgid "*.k3b|K3b Projects" msgstr "" #: k3b.cpp:586 msgid "Open File" msgstr "打開檔案" #: k3b.cpp:611 msgid "Saving file..." msgstr "正在儲存檔案..." #: k3b.cpp:621 k3b.cpp:665 msgid "Could not save the current document!" msgstr "無法儲存目前的文件!" #: k3b.cpp:621 k3b.cpp:665 k3b.cpp:685 k3b.cpp:692 msgid "I/O Error" msgstr "I/O錯誤" #: k3b.cpp:636 msgid "Saving file with a new filename..." msgstr "用新檔名儲存檔案..." #: data/k3bdataburndialog.cpp:416 k3b.cpp:660 #, c-format msgid "Do you want to overwrite %1" msgstr "您想要覆蓋%1嗎?" #: data/k3bdataburndialog.cpp:416 k3b.cpp:660 msgid "File exists..." msgstr "檔案存在..." #: k3b.cpp:682 msgid "Export to cdrdao-toc File" msgstr "" #: k3b.cpp:685 k3b.cpp:692 #, c-format msgid "Could not write to file %1" msgstr "無法寫入到檔案 %1" #: k3b.cpp:689 msgid "Export to mkisofs-pathspec File" msgstr "" #: k3b.cpp:700 msgid "Closing file..." msgstr "正在關閉檔案..," #: k3b.cpp:785 msgid "Creating new Audio Project." msgstr "建立新的Audio專案." #: k3b.cpp:792 k3b.cpp:810 k3b.cpp:829 #, c-format msgid "Untitled%1" msgstr "無標題%1" #: k3b.cpp:803 msgid "Creating new Data Project." msgstr "建立新的資料專案." #: k3b.cpp:822 msgid "Creating new Mixed Mode Project." msgstr "建立新的混合模式專案." #: k3b.cpp:840 msgid "Creating new video encoding project." msgstr "" #: k3b.cpp:855 msgid "Please add files to your project first!" msgstr "請先將檔案加入到您的專案!" #: k3b.cpp:856 msgid "No data to burn" msgstr "無資料可供燒錄" #: k3b.cpp:868 msgid "Reading Options..." msgstr "正在讀取選項..." #: k3b.cpp:877 msgid "Searching for external programs..." msgstr "正在尋找外部程式..." #: k3b.cpp:899 msgid "Scanning for CD devices..." msgstr "正在掃瞄CD裝置..." #: k3b.cpp:919 msgid "Initializing CD view..." msgstr "正在起始CD檢視..." #: k3b.cpp:924 msgid "Reading local CDDB database..." msgstr "" #: k3b.cpp:930 k3bburnprogressdialog.cpp:155 msgid "Ready" msgstr "準備就緒" #: k3b.cpp:1002 msgid "Select Files to add to Project" msgstr "選擇要加入專案的檔案" #: k3b.cpp:1007 k3bfileview.cpp:202 msgid "Please create a project before adding files" msgstr "請在加入檔案前先建立一個專案" #: k3b.cpp:1007 msgid "No active Project" msgstr "" #: k3baudioplayer.cpp:160 k3baudioplayer.cpp:520 msgid "no file" msgstr "無檔案" #: k3baudioplayer.cpp:221 msgid "Clear list" msgstr "" #: k3baudioplayer.cpp:335 msgid "No running aRtsd found" msgstr "找不到正在執行的aRtsd" #: k3baudioplayer.cpp:342 msgid "Unknown file format" msgstr "未知的檔案格式" #: k3baudioplayer.cpp:562 msgid "playing" msgstr "正在播放" #: k3baudioplayer.cpp:565 msgid "paused" msgstr "暫停" #: k3baudioplayer.cpp:568 msgid "stopped" msgstr "停止" #: k3bblankingdialog.cpp:31 msgid "Blanking CD-RW" msgstr "清除CD-RW" #: k3bblankingdialog.cpp:32 msgid "Blank" msgstr "清除" #: k3bblankingdialog.cpp:32 msgid "Start blanking" msgstr "開始清除" #: k3bblankingdialog.cpp:61 msgid "Blanking type" msgstr "" #: k3bblankingdialog.cpp:71 msgid "Fast" msgstr "快速" #: k3bblankingdialog.cpp:72 msgid "Complete" msgstr "完整" #: k3bblankingdialog.cpp:73 msgid "Blank last track" msgstr "清除最後的軌道" #: k3bblankingdialog.cpp:74 msgid "Unclose last session" msgstr "" #: k3bblankingdialog.cpp:75 msgid "Blank last session" msgstr "" #: k3bblankingdialog.cpp:86 msgid "Output" msgstr "輸出" #: k3bblankingdialog.cpp:96 k3bburnprogressdialog.cpp:185 msgid "type" msgstr "型態" #: k3bblankingdialog.cpp:97 msgid "message" msgstr "訊息" #: k3bblankingdialog.cpp:113 msgid "" "Force\n" "(Try this if K3b\n" "is not able to\n" "blank a CD-RW in\n" "normal mode)" msgstr "" "強迫\n" "(如果K3b\n" "無法以正常模式\n" "清除CD-RW\n" "請試這個)" #: k3bblankingdialog.cpp:173 k3bblankingdialog.cpp:210 #: k3bburnprogressdialog.cpp:407 msgid "Do you really want to cancel?" msgstr "您真的想要取消嗎?" #: k3bblankingdialog.cpp:234 msgid "%1 does not support CD-RW writing." msgstr "%1 不支援CD-RW燒錄." #: k3bblankingjob.cpp:116 msgid "Start blanking disk at speed %1..." msgstr "開始以 %1 的速度清除碟片..." #: k3bblankingjob.cpp:153 msgid "Process completed successfully" msgstr "成功地完成了程序" #: k3bblankingjob.cpp:160 msgid "Sorry, no error handling yet! :-((" msgstr "抱歉,還沒有錯誤處理! :-((" #: data/k3bdatajob.cpp:775 data/k3bisoimagejob.cpp:510 k3bblankingjob.cpp:167 msgid "cdrecord did not exit cleanly." msgstr "" #: k3bburnprogressdialog.cpp:70 msgid "Debugging output" msgstr "除錯輸出" #: k3bburnprogressdialog.cpp:107 k3bburnprogressdialog.cpp:216 #: k3bburnprogressdialog.cpp:355 k3bsetup/k3bsetupwizardtabs.cpp:698 msgid "Progress" msgstr "進度" #: k3bburnprogressdialog.cpp:186 msgid "info" msgstr "資訊" #: k3bburnprogressdialog.cpp:196 msgid "Show Debugging Output" msgstr "顯示除錯輸出" #: k3bburnprogressdialog.cpp:199 msgid "Buffer Status" msgstr "緩衝區狀態" #: device/k3bdevicewidget.cpp:298 k3bburnprogressdialog.cpp:208 msgid "Writer" msgstr "" #: k3bburnprogressdialog.cpp:269 k3bburnprogressdialog.cpp:275 msgid "%1 of %2 MB written" msgstr "已燒錄 %2 MB中的 %1 MB" #: k3bburnprogressdialog.cpp:312 k3bsetup/k3bsetup.cpp:101 #: k3bsetup/k3bsetup.cpp:113 k3bsetup/k3bsetup.cpp:125 #: k3bsetup/k3bsetup.cpp:286 k3bsetup/k3bsetup.cpp:307 #: k3bsetup/k3bsetup.cpp:332 k3bsetup/k3bsetup.cpp:391 msgid "Success" msgstr "成功" #: k3bburnprogressdialog.cpp:321 msgid "Canceled" msgstr "取消" #: k3bburnprogressdialog.cpp:390 msgid "Writer: %1 %2" msgstr "" #: k3bburnprogressdialog.cpp:445 msgid "Overall progress (%1)" msgstr "全部進度 (%1)" #: k3bcddb.cpp:339 k3bcddb.cpp:943 msgid "Searching %1 on port %2" msgstr "" #: k3bcddb.cpp:350 msgid "Host found" msgstr "" #: k3bcddb.cpp:356 msgid "Connected" msgstr "已連線" #: k3bcddb.cpp:400 msgid "Connection closed" msgstr "連線關閉" #: k3bcddb.cpp:463 msgid "OK, read access" msgstr "" #: k3bcddb.cpp:471 msgid "Connection refused" msgstr "拒絕連線" #: k3bcddb.cpp:479 msgid "Handshake successful" msgstr "" #: k3bcddb.cpp:488 msgid "Handshake failed" msgstr "" #: k3bcddb.cpp:508 msgid "Found exact match" msgstr "" #: k3bcddb.cpp:525 msgid "Found multiple exact matches" msgstr "" #: k3bcddb.cpp:533 msgid "Found inexact matches" msgstr "" #: k3bcddb.cpp:540 msgid "No match found" msgstr "" #: k3bcddb.cpp:548 msgid "Error while querying" msgstr "" #: k3bcddb.cpp:585 msgid "Could not read match" msgstr "" #: k3bcddb.cpp:779 k3bcddb.cpp:780 msgid "Connection to %1 refused" msgstr "連線到 %1 被拒絕" #: k3bcddb.cpp:783 k3bcddb.cpp:784 #, c-format msgid "Could not find host %1" msgstr "" #: k3bcddb.cpp:787 k3bcddb.cpp:788 #, c-format msgid "Error while reading from %1" msgstr "" #: k3bcddb.cpp:817 #, c-format msgid "Searching entry in %1" msgstr "" #: k3bcddbmultientriesdialog.cpp:30 msgid "CDDB Database Entry" msgstr "" #: k3bcddbmultientriesdialog.cpp:38 msgid "K3b found multiple inexact CDDB entries. Please select one." msgstr "" #: k3bdiroperator.cpp:70 msgid "Short View" msgstr "" #: k3bdirview.cpp:103 msgid "K3b is trying to retrieve information about the inserted disk." msgstr "" #: k3bdirview.cpp:136 msgid "&Disk info" msgstr "碟片訊息(&D)" #: k3bdirview.cpp:138 msgid "&Unmount" msgstr "卸載(%U)" #: k3bdirview.cpp:140 msgid "&Eject" msgstr "退出(&E)" #: k3bdirview.cpp:183 msgid "Trying to fetch information about the inserted disk." msgstr "正在嘗試截取插入碟片的資訊." #: k3bdirview.cpp:214 msgid "" "Found Mixed-mode CD. Do you want K3b to mount the data part or show all the " "tracks?" msgstr "" "發現混合模式CD.您想要K3b去掛載資料部份或顯示所有軌道呢?" #: k3bdirview.cpp:215 msgid "Mixed-mode CD" msgstr "混合模式CD" #: k3bdirview.cpp:216 msgid "Mount CD" msgstr "掛載CD" #: k3bdirview.cpp:217 msgid "Show tracks" msgstr "顯示軌道" #: k3bdirview.cpp:242 rip/k3bdvdrippingprocess.cpp:238 msgid "K3b could not mount %1. Please run K3bSetup." msgstr "K3b無法掛載%1. 請執行K3bSetup" #: k3bdirview.cpp:243 rip/k3bdvdrippingprocess.cpp:238 msgid "I/O error" msgstr "I/O錯誤" #: k3bfiletreeview.cpp:34 msgid "Drive: " msgstr "裝置: " #: k3bfiletreeview.cpp:57 msgid "Directories" msgstr "目錄" #: k3bfiletreeview.cpp:81 msgid "Home" msgstr "家目錄" #: k3bfiletreeview.cpp:84 msgid "Root" msgstr "根目錄" #: k3bfileview.cpp:86 msgid "&Play" msgstr "播放(&P)" #: k3bfileview.cpp:88 msgid "En&queue" msgstr "" #: k3bfileview.cpp:90 msgid "&Add to Project" msgstr "加入專案(&A)" #: k3bfileview.cpp:118 msgid "Filter:" msgstr "" #: k3bfileview.cpp:123 msgid "*|All files" msgstr "*|所有檔案" #: k3bfileview.cpp:124 msgid "audio/x-mp3 application/x-ogg audio/wav |Sound files" msgstr "" #: k3bfileview.cpp:125 msgid "audio/x-mp3 |MP3 sound files" msgstr "" #: k3bfileview.cpp:126 msgid "application/x-ogg |Ogg Vorbis sound files" msgstr "" #: k3bfileview.cpp:202 msgid "No Active Project" msgstr "" #: k3bfillstatusdisplay.cpp:78 msgid "Minutes" msgstr "分" #: k3bfillstatusdisplay.cpp:79 msgid "Megabytes" msgstr "" #: k3bfillstatusdisplay.cpp:84 k3bfillstatusdisplay.cpp:85 #: k3bfillstatusdisplay.cpp:86 k3bfillstatusdisplay.cpp:175 #: k3bfillstatusdisplay.cpp:176 k3bfillstatusdisplay.cpp:177 msgid "%1 MB" msgstr "" #: k3bfillstatusdisplay.cpp:87 msgid "custom..." msgstr "自訂..." #: k3bfillstatusdisplay.cpp:94 msgid "Show size in..." msgstr "" #: k3bfillstatusdisplay.cpp:97 msgid "CD size" msgstr "CD大小" #: k3bfillstatusdisplay.cpp:187 k3bfillstatusdisplay.cpp:188 #: k3bfillstatusdisplay.cpp:189 rip/k3bcdview.cpp:223 msgid "%1 minutes" msgstr "%1 分" #: k3bfillstatusdisplay.cpp:234 msgid "Custom CD size" msgstr "自訂CD大小" #: k3bfillstatusdisplay.cpp:234 msgid "Please specify the size of your CD in minutes:" msgstr "請以分為單位來指定您的CD大小" #: k3bjob.cpp:85 msgid "No cdrdao driver found." msgstr "找不到cdrdao的驅動程式" #: k3bjob.cpp:86 msgid "Please select one manually in the device settings." msgstr "請在裝置設定裡手動選擇一個" #: k3bjob.cpp:87 msgid "For most current drives this would be 'generic-mmc'." msgstr "對大部份目前的裝置而言,這應該是'generic-mmc'" #: k3bjob.cpp:96 msgid "Executing Power calibration" msgstr "" #: k3bjob.cpp:99 msgid "Power calibration successful" msgstr "" #: k3bjob.cpp:100 msgid "Preparing burn process..." msgstr "正在準備燒錄程序..." #: k3bjob.cpp:103 msgid "Flushing cache" msgstr "" #: k3bjob.cpp:106 msgid "Writing CD-Text lead-in..." msgstr "" #: k3bjob.cpp:109 msgid "Turning BURN-Proof on" msgstr "" #: k3bprojectburndialog.cpp:40 msgid "Write CD" msgstr "" #: k3bprojectburndialog.cpp:41 msgid "Save Settings and close" msgstr "" #: k3bprojectburndialog.cpp:42 msgid "Saves the settings to the project and closes the burn dialog." msgstr "" #: data/k3bisoimagewritingdialog.cpp:57 k3bprojectburndialog.cpp:48 msgid "Write" msgstr "" #: k3bprojectburndialog.cpp:60 msgid "Defaults" msgstr "" #: k3bprojectburndialog.cpp:61 msgid "User Defaults" msgstr "" #: k3bprojectburndialog.cpp:62 msgid "Save User Defaults" msgstr "" #: k3bprojectburndialog.cpp:78 msgid "Load K3b default settings" msgstr "" #: k3bprojectburndialog.cpp:79 msgid "Load user default settings" msgstr "" #: k3bprojectburndialog.cpp:80 msgid "Save user default settings for new projects" msgstr "" #: k3bprojectburndialog.cpp:84 msgid "This sets all options back to K3b defaults." msgstr "" #: k3bprojectburndialog.cpp:85 msgid "" "This loads the settings saved with the Save User Defaults button." msgstr "" #: k3bprojectburndialog.cpp:87 msgid "" "Saves the current settings as the default for all new projects.These " "settings can also be loaded with the User Defaults button.The " "K3b defaults are not overwritten by this!" msgstr "" #: k3bprojectburndialog.cpp:141 msgid "K3b is already working on this project!" msgstr "" #: k3bprojecttabbar.cpp:28 msgid "Project" msgstr "" #: k3btempdirselectionwidget.cpp:41 msgid "Temp Directory" msgstr "" #: k3btempdirselectionwidget.cpp:46 msgid "Write image file to:" msgstr "" #: k3btempdirselectionwidget.cpp:56 msgid "Free space in temporary directory" msgstr "" #: k3btempdirselectionwidget.cpp:62 msgid "Size of CD" msgstr "" #: k3btempdirselectionwidget.cpp:85 msgid "The directory in which to save the image files" msgstr "" #: k3btempdirselectionwidget.cpp:89 msgid "" "This is the directory in which K3b will save the image files." "Please make sure that it resides on a partition that has enough free " "space." msgstr "" #: k3btempdirselectionwidget.cpp:140 msgid "Select Temporary Directory" msgstr "" #: k3btempdirselectionwidget.cpp:142 msgid "Select Temporary File" msgstr "" #: k3btempdirselectionwidget.cpp:168 msgid "Temporary directory" msgstr "" #: k3btempdirselectionwidget.cpp:170 msgid "Temporary file" msgstr "" #: k3bwriterselectionwidget.cpp:42 msgid "Burning Device" msgstr "" #: k3bwriterselectionwidget.cpp:53 msgid "Speed:" msgstr "" #: k3bwriterselectionwidget.cpp:62 msgid "Device:" msgstr "" #: k3bwriterselectionwidget.cpp:71 msgid "Writing Application" msgstr "" #: k3bwriterselectionwidget.cpp:74 msgid "cdrecord" msgstr "" #: k3bwriterselectionwidget.cpp:75 msgid "cdrdao" msgstr "" #: k3bwriterselectionwidget.cpp:111 msgid "The CD writer that will write the CD" msgstr "" #: k3bwriterselectionwidget.cpp:112 msgid "The speed at which to write the CD" msgstr "" #: k3bwriterselectionwidget.cpp:116 msgid "" "Select the CD writer that you want to write the CD.In most cases there " "will only be one writer available which does not leave much choice." msgstr "" #: k3bwriterselectionwidget.cpp:119 msgid "" "Select the speed with which you want the writer to burn.1x speed means " "150 KB/s.Caution: Make sure your system is able to send the data " "fast enough to prevent buffer underruns." msgstr "" #: main.cpp:38 msgid "" "K3b is a CD burning program that has two aims:\n" "usability and as many features as possible." msgstr "" #: main.cpp:43 msgid "file to open" msgstr "" #: main.cpp:51 msgid "K3b" msgstr "" #: main.cpp:54 msgid "Maintainer" msgstr "" #: main.cpp:55 msgid "Developer" msgstr "" #: main.cpp:56 msgid "For his bombastic artwork." msgstr "" #: main.cpp:57 msgid "For extensive testing and the first German translation." msgstr "" #: main.cpp:58 msgid "For his great cdrtools and the patient answers to all my questions." msgstr "" #: main.cpp:67 msgid "" "It appears that you have not run K3bSetup yet. It is recommended to do so. " "Should K3bSetup be started?" msgstr "" #: k3bsetup/k3bsetupwizard.cpp:21 main.cpp:69 msgid "K3b Setup" msgstr "" #: main.cpp:70 msgid "Don't prompt me again." msgstr "" #: cdcopy/k3bcdcopydialog.cpp:46 msgid "K3b CD Copy" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:47 msgid "Start CD copy" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:59 msgid "CD Reader Device" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:79 msgid "Copies" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:83 data/k3bdataburndialog.cpp:239 msgid "Simulate writing" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:86 msgid "Delete images" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:114 msgid "Fast TOC" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:158 msgid "Do not extract pre-gaps and index marks" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:160 msgid "Copy directly without creating an image" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:163 msgid "Select the drive with the CD to copy" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:164 msgid "Number of copies" msgstr "" #: cdcopy/k3bcdcopydialog.cpp:169 msgid "" "If this option is checked, K3b will ignore any pregaps and index marks on " "an audio CD.Caution: This may result in faster reading but does " "not guarantee an exact copy." msgstr "" #: cdcopy/k3bcdcopydialog.cpp:173 data/k3bdataburndialog.cpp:296 #: data/k3bisoimagewritingdialog.cpp:86 msgid "" "If this option is checked K3b will perform all writing steps with the " "laser turned off.This is useful, for example, to test a higher writing " "speed or if your system is able to write on-the-fly." msgstr "" #: cdcopy/k3bcdcopydialog.cpp:177 msgid "" "If this option is checked K3b will copy directly from the CD reader to " "the writer without creating an image first.Caution: This may " "result in buffer underruns on slow systems. It is not recommended to use " "this if the reader and writer are connected to the same IDE bus." msgstr "" #: cdcopy/k3bcdcopydialog.cpp:188 msgid "Here you should select the drive which contains the CD to copy." msgstr "" #: cdcopy/k3bcdcopydialog.cpp:189 msgid "Select how many copies you want K3b to create from the CD." msgstr "" #: cdcopy/k3bcdcopyjob.cpp:76 msgid "Retrieving information about source disk" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:84 msgid "No disk in CD reader" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:90 msgid "Source disk is empty" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:96 msgid "Source disk seems to be a DVD." msgstr "" #: cdcopy/k3bcdcopyjob.cpp:97 msgid "K3b is not able to copy DVDs yet." msgstr "" #: cdcopy/k3bcdcopyjob.cpp:108 msgid "Source disk seems to be a data CD" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:111 msgid "Source disk seems to be an audio CD" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:114 msgid "Source disk seems to be a mixed mode CD" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:126 msgid "Creating CD image" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:128 msgid "CD copy simulation" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:130 msgid "CD copy" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:199 #, c-format msgid "Starting CD copy simulation at %1x speed..." msgstr "" #: cdcopy/k3bcdcopyjob.cpp:202 cdcopy/k3bcdcopyjob.cpp:371 msgid "Starting CD copy %1 at %2x speed..." msgstr "" #: cdcopy/k3bcdcopyjob.cpp:223 cdcopy/k3bcdcopyjob.cpp:392 msgid "CD Copy simulation successfully completed" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:227 cdcopy/k3bcdcopyjob.cpp:396 msgid "CD Copy %1 successfully completed" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:290 #, c-format msgid "Reading CD to image %1" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:291 data/k3bdatajob.cpp:477 msgid "Creating image" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:309 msgid "Image successfully created." msgstr "" #: cdcopy/k3bcdcopyjob.cpp:368 msgid "CD write simulation" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:372 #, c-format msgid "Writing CD copy %1" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:484 rip/k3bcddacopy.cpp:107 rip/k3bcddacopy.cpp:138 #, c-format msgid "Reading track %1" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:489 msgid "Found ISRC code" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:492 #, c-format msgid "Found pregap: %1" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:545 cdcopy/k3bcdcopyjob.cpp:571 msgid "Removed image files" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:560 msgid "Unable to unlock CD reader" msgstr "" #: cdcopy/k3bcdcopyjob.cpp:562 msgid "Unable to unlock CD writer" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:159 msgid "K3b was unable to retrieve disk information." msgstr "" #: cdinfo/k3bdiskinfoview.cpp:164 msgid "No disk" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:165 rip/k3bcddacopy.cpp:75 msgid "No disk in drive" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:172 rip/k3bcddacopy.cpp:81 msgid "Disk is empty" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:178 msgid "Audio CD" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:182 msgid "Data CD" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:186 msgid "Mixed mode CD" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:190 msgid "DVD" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:201 msgid "Disk" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:206 data/k3bdatapropertiesdialog.cpp:64 #: data/k3bisoimagewritingdialog.cpp:196 videoEncoding/k3bdivxcrop.cpp:108 msgid "Size:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:207 cdinfo/k3bdiskinfoview.cpp:213 msgid "%1 min" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:208 cdinfo/k3bdiskinfoview.cpp:214 msgid "%2 MB" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:212 msgid "Remaining:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:218 msgid "Medium:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:224 msgid "CDRW:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:225 cdinfo/k3bdiskinfoview.cpp:229 #: device/k3bdevicewidget.cpp:463 device/k3bdevicewidget.cpp:474 msgid "yes" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:225 cdinfo/k3bdiskinfoview.cpp:229 #: device/k3bdevicewidget.cpp:464 msgid "no" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:228 msgid "Appendable:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:232 msgid "Sessions:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:247 msgid "ISO9660 info" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:251 data/k3bisoimagewritingdialog.cpp:154 msgid "Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:254 data/k3bisoimagewritingdialog.cpp:156 msgid "System Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:257 data/k3bisoimagewritingdialog.cpp:158 msgid "Volume Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:260 data/k3bisoimagewritingdialog.cpp:160 msgid "Volume Set Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:263 data/k3bisoimagewritingdialog.cpp:162 msgid "Publisher Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:266 data/k3bisoimagewritingdialog.cpp:164 msgid "Preparer Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:269 data/k3bisoimagewritingdialog.cpp:166 msgid "Application Id:" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:281 msgid "Tracks" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:283 msgid "disk is empty" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:287 data/k3bdatafileview.cpp:58 #: rip/k3bcdview.cpp:98 rip/k3bripperwidget.cpp:92 msgid "Type" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:288 msgid "First Sector" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:289 msgid "Last Sector" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:302 rip/k3bcdview.cpp:148 #: rip/k3bripperwidget.cpp:271 msgid "Audio" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:307 msgid "Data/mode1" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:309 msgid "Data/mode2" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:311 rip/k3bcdview.cpp:148 #: rip/k3bripperwidget.cpp:271 msgid "Data" msgstr "" #: cdinfo/k3bdiskinfoview.cpp:313 msgid "%1 (%2)" msgstr "" #: data/k3bdataburndialog.cpp:114 mixed/k3bmixedburndialog.cpp:48 msgid "Volume Desc" msgstr "" #: data/k3bdataburndialog.cpp:115 msgid "Settings" msgstr "" #: data/k3bdataburndialog.cpp:247 msgid "Only create image" msgstr "" #: data/k3bdataburndialog.cpp:251 msgid "Delete image" msgstr "" #: data/k3bdataburndialog.cpp:259 msgid "Use BURN-PROOF" msgstr "" #: data/k3bdataburndialog.cpp:287 msgid "Write files directly to CD without creating an image" msgstr "" #: data/k3bdataburndialog.cpp:288 msgid "Only create an ISO9660 image" msgstr "" #: data/k3bdataburndialog.cpp:290 data/k3bisoimagewritingdialog.cpp:79 msgid "Write in disk at once mode" msgstr "" #: data/k3bdataburndialog.cpp:291 data/k3bisoimagewritingdialog.cpp:80 msgid "Enable BURN-PROOF to avoid buffer underruns" msgstr "" #: data/k3bdataburndialog.cpp:300 msgid "" "If this option is checked, K3b will not create an image first but write " "the files directly to the CD.Caution: Although this should work on " "most systems, make sure the data is sent to the writer fast enough." msgstr "" #: data/k3bdataburndialog.cpp:305 msgid "" "If this option is checked, K3b will only create an ISO9660 image and not " "do any actual writing.The image can later be written to a CD with most " "current CD writing programs (including K3b of course)." msgstr "" #: data/k3bdataburndialog.cpp:309 msgid "" "If this option is checked, K3b will remove any created images after the " "writing has finished.Uncheck this if you want to keep the images." msgstr "" #: data/k3bdataburndialog.cpp:312 data/k3bisoimagewritingdialog.cpp:90 msgid "" "If this option is checked, K3b will write the CD in 'disk at once' mode " "as compared to 'track at once' (TAO).It is always recommended to use DAO " "where possible.Caution: Track pregaps other than 2 seconds long " "are only supported in DAO mode." msgstr "" #: data/k3bdataburndialog.cpp:317 data/k3bisoimagewritingdialog.cpp:95 msgid "" "If this option is checked, K3b enables BURN-PROOF. This is a " "feature of the CD writer which avoids buffer underruns." msgstr "" #: data/k3bdataburndialog.cpp:362 msgid "Multi-Session" msgstr "" #: data/k3bdataburndialog.cpp:370 msgid "&No multi-session" msgstr "" #: data/k3bdataburndialog.cpp:371 msgid "&Start multi-session" msgstr "" #: data/k3bdataburndialog.cpp:372 msgid "&Continue multi-session" msgstr "" #: data/k3bdataburndialog.cpp:373 msgid "&Finish multi-session" msgstr "" #: data/k3bdataburndialog.cpp:407 msgid "" "Not enough space in temporary directory. Either change the directory or " "select on-the-fly burning." msgstr "" #: data/k3bdatadirtreeview.cpp:56 data/k3bdatapropertiesdialog.cpp:97 #: data/k3bdataviewitem.cpp:110 msgid "Directory" msgstr "" #: data/k3bdatadirtreeview.cpp:270 data/k3bdatafileview.cpp:230 msgid "New Directory..." msgstr "" #: data/k3bdatadirtreeview.cpp:274 data/k3bdatafileview.cpp:234 msgid "Rename" msgstr "" #: data/k3bdatadirtreeview.cpp:313 data/k3bdatadirtreeview.cpp:318 #: data/k3bdatafileview.cpp:278 data/k3bdatafileview.cpp:283 msgid "Please insert the name for the new directory" msgstr "" #: data/k3bdatadirtreeview.cpp:317 data/k3bdatafileview.cpp:282 msgid "A file with that name already exists. " msgstr "" #: data/k3bdatadoc.cpp:143 msgid "Adding files to Project %1..." msgstr "" #: data/k3bdatadoc.cpp:209 #, c-format msgid "" "Found recursion in directory tree. Omitting\n" "%1" msgstr "" #: data/k3bdatadoc.cpp:223 msgid "A directory with that name already exists. Please enter a new name." msgstr "" #: data/k3bdatadoc.cpp:305 msgid "A file with that name already exists. Please enter a new name." msgstr "" #: data/k3bdatadoc.cpp:977 msgid "" "Due to a bug in mkisofs, K3b is unable to handle filenames that contain more " "than one backslash:" msgstr "" #: data/k3bdatafileview.cpp:57 msgid "Name" msgstr "" #: data/k3bdatafileview.cpp:60 msgid "Local Path" msgstr "" #: data/k3bdatafileview.cpp:61 msgid "Link" msgstr "" #: data/k3bdatafileview.cpp:236 msgid "Parent Directory" msgstr "" #: data/k3bdatafileview.cpp:352 msgid "Use drag'n'drop to add files and directories to the project." msgstr "" #: data/k3bdatafileview.cpp:354 msgid "To remove or rename files use the context menu." msgstr "" #: data/k3bdatajob.cpp:82 data/k3bdatajob.cpp:90 data/k3bdatajob.cpp:99 #: data/k3bisoimager.cpp:117 #, c-format msgid "Could not write to temporary file %1" msgstr "" #: data/k3bdatajob.cpp:122 data/k3bdatajob.cpp:295 data/k3bdatajob.cpp:485 #: data/k3bisoimagejob.cpp:221 data/k3bisoimagejob.cpp:306 #: data/k3bisoimagejob.cpp:347 msgid "Writing canceled." msgstr "" #: data/k3bdatajob.cpp:128 msgid "Searching previous session" msgstr "" #: data/k3bdatajob.cpp:188 msgid "Could not retrieve multisession information from disk." msgstr "" #: data/k3bdatajob.cpp:189 msgid "The disk is either empty or not appendable." msgstr "" #: data/k3bdatajob.cpp:240 data/k3bdatajob.cpp:470 data/k3bisoimager.cpp:172 msgid "Could not start mkisofs!" msgstr "" #: data/k3bdatajob.cpp:277 msgid "Could not retrieve size of data. On-the-fly writing did not work." msgstr "" #: data/k3bdatajob.cpp:278 msgid "Please create an image first!" msgstr "" #: data/k3bdatajob.cpp:413 msgid "Could not start mkisofs/cdrecord!" msgstr "" #: data/k3bdatajob.cpp:419 msgid "Starting multi-session disk." msgstr "" #: data/k3bdatajob.cpp:421 msgid "Appending session" msgstr "" #: data/k3bdatajob.cpp:423 msgid "Finishing multi-session disk" msgstr "" #: data/k3bdatajob.cpp:431 msgid "Writing data" msgstr "" #: data/k3bdatajob.cpp:476 #, c-format msgid "Creating image in %1" msgstr "" #: data/k3bdatajob.cpp:649 data/k3bisoimagejob.cpp:451 msgid "Writing ISO data" msgstr "" #: data/k3bdatajob.cpp:707 #, c-format msgid "Image successfully created in %1" msgstr "" #: data/k3bdatajob.cpp:716 #, c-format msgid "Removed image file %1" msgstr "" #: data/k3bdatajob.cpp:727 msgid "mkisofs returned an error. (code %1)" msgstr "" #: data/k3bdatajob.cpp:728 data/k3bdatajob.cpp:767 data/k3bisoimagejob.cpp:501 msgid "No error handling yet!" msgstr "" #: data/k3bdatajob.cpp:729 data/k3bdatajob.cpp:768 data/k3bisoimagejob.cpp:502 msgid "Please send me an email with the last output..." msgstr "" #: data/k3bdatajob.cpp:736 msgid "mkisofs did not exit cleanly." msgstr "" #: data/k3bdatajob.cpp:757 data/k3bisoimagejob.cpp:491 msgid "Simulation successfully finished" msgstr "" #: data/k3bdatajob.cpp:759 data/k3bisoimagejob.cpp:493 msgid "Writing successfully finished" msgstr "" #: data/k3bdatajob.cpp:766 data/k3bisoimagejob.cpp:500 msgid "cdrecord returned an error! (code %1)" msgstr "" #: data/k3bdatajob.cpp:797 data/k3bisoimager.cpp:249 msgid "Mkisofs executable not found." msgstr "" #: data/k3bdatajob.cpp:1148 #, c-format msgid "Removing ISO image %1" msgstr "" #: data/k3bdatapropertiesdialog.cpp:40 msgid "File properties" msgstr "" #: data/k3bdatapropertiesdialog.cpp:62 msgid "Type:" msgstr "" #: data/k3bdatapropertiesdialog.cpp:63 msgid "Location:" msgstr "" #: data/k3bdatapropertiesdialog.cpp:71 msgid "Local name:" msgstr "" #: data/k3bdatapropertiesdialog.cpp:73 msgid "Local location:" msgstr "" #: data/k3bdatapropertiesdialog.cpp:86 data/k3bdataviewitem.cpp:167 #, c-format msgid "Link to %1" msgstr "" #: data/k3bdatapropertiesdialog.cpp:105 msgid "" "\n" "(in %1 files and %2 directories)" msgstr "" #: data/k3bdatapropertiesdialog.cpp:124 msgid "Hide on Rockridge" msgstr "" #: data/k3bdatapropertiesdialog.cpp:125 msgid "Hide on Joliet" msgstr "" #: data/k3bdatapropertiesdialog.cpp:143 msgid "" "If this option is checked, the file or directory (and its entire " "contents) will be hidden on the ISO9660 and RockRidge filesystem.This " "is useful, for example, for having different README files for RockRidge and " "Joliet, which can be managed by hiding README.joliet on RockRidge and README." "rr on the Joliet filesystem." msgstr "" #: data/k3bdatapropertiesdialog.cpp:150 msgid "" "If this option is checked, the file or directory (and its entire " "contents) will be hidden on the Joliet filesystem.This is useful, for " "example, for having different README files for RockRidge and Joliet, which " "can be managed by hiding README.joliet on RockRidge and README.rr on the " "Joliet filesystem." msgstr "" #: data/k3bisoimagejob.cpp:130 msgid "Please specify a CD writing device" msgstr "" #: data/k3bisoimagejob.cpp:137 #, c-format msgid "Could not find image %1" msgstr "" #: data/k3bisoimagejob.cpp:243 msgid "Writing ISO Image" msgstr "" #: data/k3bisoimagejob.cpp:328 msgid "Writing cue/bin image" msgstr "" #: data/k3bisoimagejob.cpp:546 msgid "cdrdao returned an error! (code %1)" msgstr "" #: data/k3bisoimagewritingdialog.cpp:56 msgid "Write Image to CD" msgstr "" #: data/k3bisoimagewritingdialog.cpp:57 msgid "Start writing" msgstr "" #: data/k3bisoimagewritingdialog.cpp:82 msgid "Allow further sessions to be appended" msgstr "" #: data/k3bisoimagewritingdialog.cpp:98 msgid "" "If this option is checked, K3b will not close the CD, meaning it will " "only write a temporary table of contents.This allows further sessions " "to be appended to the CD." msgstr "" #: data/k3bisoimagewritingdialog.cpp:118 msgid "Image to Write" msgstr "" #: data/k3bisoimagewritingdialog.cpp:214 msgid "Burn-proof" msgstr "" #: data/k3bisoimagewritingdialog.cpp:215 msgid "Simulate" msgstr "" #: data/k3bisoimagewritingdialog.cpp:229 msgid "Use cue-file" msgstr "" #: data/k3bisoimagewritingdialog.cpp:230 msgid "Do not close CD" msgstr "" #: data/k3bisoimagewritingdialog.cpp:267 #, c-format msgid "Could not find file %1" msgstr "" #: data/k3bisoimagewritingdialog.cpp:421 msgid "Seems to be an ISO9660 image" msgstr "" #: data/k3bisoimagewritingdialog.cpp:428 msgid "" "Usable cue/bin combination found:\n" "%1\n" "%2" msgstr "" #: data/k3bisoimagewritingdialog.cpp:432 msgid "Seems not to be a usable image file (or raw image)" msgstr "" #: data/k3bisoimagewritingdialog.cpp:450 msgid "No file" msgstr "" #: data/k3bisoimagewritingdialog.cpp:460 msgid "Choose ISO image file or cue/bin combination" msgstr "" #: data/k3bisoimager.cpp:221 msgid "Could not determine size of resulting image file." msgstr "" #: device/k3bdevicewidget.cpp:113 msgid "Refresh" msgstr "" #: device/k3bdevicewidget.cpp:114 msgid "Add Device..." msgstr "" #: device/k3bdevicewidget.cpp:115 msgid "Rescan the Devices" msgstr "" #: device/k3bdevicewidget.cpp:125 msgid "CD/DVD Drives" msgstr "" #: device/k3bdevicewidget.cpp:141 msgid "Device Info" msgstr "" #: device/k3bdevicewidget.cpp:150 msgid "System device name:" msgstr "" #: device/k3bdevicewidget.cpp:152 msgid "Interface type:" msgstr "" #: device/k3bdevicewidget.cpp:154 msgid "Firmware version:" msgstr "" #: device/k3bdevicewidget.cpp:156 msgid "Vendor:" msgstr "" #: device/k3bdevicewidget.cpp:159 msgid "Model:" msgstr "" #: device/k3bdevicewidget.cpp:163 msgid "Max read speed:" msgstr "" #: device/k3bdevicewidget.cpp:166 msgid "Max write speed:" msgstr "" #: device/k3bdevicewidget.cpp:169 msgid "cdrdao driver:" msgstr "" #: device/k3bdevicewidget.cpp:171 msgid "BURN-Proof:" msgstr "" #: device/k3bdevicewidget.cpp:173 msgid "Write CDRW:" msgstr "" #: device/k3bdevicewidget.cpp:175 msgid "Write CD-Text:" msgstr "" #: device/k3bdevicewidget.cpp:300 msgid "Reader" msgstr "" #: device/k3bdevicewidget.cpp:340 msgid "Generic SCSI" msgstr "" #: device/k3bdevicewidget.cpp:340 msgid "IDE" msgstr "" #: device/k3bdevicewidget.cpp:399 msgid "" "Please enter the device name where K3b should search\n" " for a new drive (example: /dev/mebecdrom):" msgstr "" #: device/k3bdevicewidget.cpp:408 #, c-format msgid "" "Could not find an additional device at\n" "%1" msgstr "" #: device/k3bdevicewidget.cpp:460 msgid "auto" msgstr "" #: device/k3bemptydiscwaiter.cpp:35 msgid "Waiting for disk" msgstr "" #: device/k3bemptydiscwaiter.cpp:36 msgid "Force" msgstr "" #: device/k3bemptydiscwaiter.cpp:55 msgid "Force K3b to continue if it seems not to detect your empty CDR." msgstr "" #: device/k3bemptydiscwaiter.cpp:68 msgid "Please insert an appendable CDR medium into drive%1 %2 (%3)." msgstr "" #: device/k3bemptydiscwaiter.cpp:70 msgid "Please insert an empty CDR medium into drive%1 %2 (%3)." msgstr "" #: device/k3bemptydiscwaiter.cpp:91 msgid "K3b found a rewritable disk. Should it be erased?" msgstr "" #: device/k3bemptydiscwaiter.cpp:92 msgid "Found CD-RW" msgstr "" #: device/k3bemptydiscwaiter.cpp:135 msgid "Erasing" msgstr "" #: device/k3bemptydiscwaiter.cpp:142 msgid "Erasing CD-RW" msgstr "" #: device/k3bemptydiscwaiter.cpp:165 msgid "Disk successfully erased. Please reload the disk." msgstr "" #: device/k3bemptydiscwaiter.cpp:167 msgid "K3b was unable to erase the disk." msgstr "" #: k3bsetup/k3bsetup.cpp:94 msgid "Saving CD devices to global configuration." msgstr "" #: k3bsetup/k3bsetup.cpp:106 msgid "Writing external program paths to global configuration." msgstr "" #: k3bsetup/k3bsetup.cpp:117 msgid "Writing permission settings to global configuration." msgstr "" #: k3bsetup/k3bsetup.cpp:253 msgid "Changing CD device permissions." msgstr "" #: k3bsetup/k3bsetup.cpp:268 msgid "Could not find generic device (%1)" msgstr "" #: k3bsetup/k3bsetup.cpp:278 msgid "Could not find ioctl device (%1)" msgstr "" #: k3bsetup/k3bsetup.cpp:300 #, c-format msgid "Changing permissions for %1." msgstr "" #: k3bsetup/k3bsetup.cpp:310 msgid "%1 is not a %2 executable." msgstr "" #: k3bsetup/k3bsetup.cpp:315 #, c-format msgid "Could not find %1." msgstr "" #: k3bsetup/k3bsetup.cpp:324 msgid "Saving old %1 to %2" msgstr "" #: k3bsetup/k3bsetup.cpp:366 #, c-format msgid "Creating fstab entry for %1" msgstr "" #: k3bsetup/k3bsetup.cpp:376 msgid "Could not create mount point '%1'" msgstr "" #: k3bsetup/k3bsetuptab.cpp:47 msgid "Step %1 of %2" msgstr "" #: k3bsetup/k3bsetupwizard.cpp:54 msgid "Do you really want to discard all changes?" msgstr "" #: k3bsetup/k3bsetupwizard.cpp:88 msgid "All settings have been saved.\n" msgstr "" #: k3bsetup/k3bsetupwizard.cpp:90 msgid "" "If the configuration of your system changes, just run K3b Setup again.\n" "Thank you for using K3b. Have a lot of fun!" msgstr "" #: k3bsetup/k3bsetupwizard.cpp:94 msgid "K3b Setup Finished" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:44 msgid "Welcome to K3bSetup" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:49 msgid "" "<h1>Welcome to K3b Setup.</h1>This Wizard will help you to prepare your " "system for CD writing with K3b. First of all: Don't worry about Linux " "permissions, K3b Setup takes care of nearly everything. So if you are new to " "Linux and know nothing about things like suid root, don't panic! Just click " "Next.If you know what is needed to write CDs under Linux and think " "you don't need a wizard like this, please do not exit, as there are some " "things specific to K3b. Also, K3b Setup will not change anything until after " "the setup wizard has finished.Thank you for using K3b." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:73 option/k3boptiondialog.cpp:165 msgid "Setup CD Devices" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:84 msgid "" "K3b Setup has detected the following CD drives.You can add " "additional devices (like /dev/cdrom) if your drive has not been detected.</" "p>K3b will only detect the capabilities of generic-mmc drives correctly. " "For all other drives you need to set them manually." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:107 msgid "" "K3b Setup did not find any CD devices on your system. K3b is not very useful " "without any. Do you really want to continue?" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:109 msgid "Missing CD Devices" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:133 msgid "No CD Writer Found" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:138 msgid "" "K3b Setup did not find a CD writer on your system.\n" "If you do not have a CD writer, but just want to use K3b for CD ripping " "then this does not matter.\n" "If you are sure you have either a SCSI CD writer or have enabled SCSI " "emulation, please go back and add the device manually. If that still does " "not work, issue a bug report.\n" "Otherwise you must enable SCSI emulation for (at least) your ATAPI CD " "writer (although it is recommended to enable SCSI emulation for all CD " "drives, it is not necessary), since this is the only task K3b Setup is " "unable to do for you at the moment.\n" "How to enable SCSI emulation\n" "\n" "<ol>\n" "<li>Make sure your kernel supports SCSI emulation, at least as a module. If " "you use a standard kernel from your distribution, this is likely to be the " "case. Try loading the module with <pre>modprobe ide-scsi</pre> as root. If " "your kernel does not support SCSI emulation you need to build your own " "kernel, or at least a module. Unfortunately that goes beyond the scope of " "this documentation.</li>\n" "<li>If your kernel supports SCSI emulation as a module it is recommended to " "add an entry in /etc/modules.conf so that the module is loaded " "automatically. Otherwise you have to load it with <pre>modprobe ide-scsi</" "pre> every time you need it.\n" "</li>\n" "<li>The last step is to inform the kernel that you are about to use SCSI " "emulation at boot time. If you are using lilo (which is highly recommended), " "you need to add <pre>append = \"hdc=ide-scsi hdd=ide-scsi\"</pre> to your /" "etc/lilo.conf and re-run lilo as root to install the new configuration.\n" "After rebooting your system, your CD writer is ready for action.</li>\n" "</ol>\n" "If you experience problems, feel free to contact the program author." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:182 msgid "Setup Mount Points for the CD Drives" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:192 msgid "" "On Linux, CD devices are mounted into the file tree. Normally only root " "has permission to mount drives. K3b Setup can create entries in /etc/fstab " "for each of the detected CD drives. Every user, and especially K3b, will " "then be able to mount the devices on the given path." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:199 msgid "CD drive" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:200 msgid "System device" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:201 msgid "Mount point" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:208 msgid "Let K3b setup create fstab entries" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:211 msgid "Select Mount Point" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:221 k3bsetup/k3bsetupwizardtabs.cpp:369 msgid "Click twice to change a value" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:311 #, c-format msgid "Select new Mount Point for %1" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:328 msgid "Setup External Applications Used by K3b" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:338 msgid "" "K3b uses cdrdao, cdrecord and mkisofs to actually write the CDs. It is " "recommended to install these programs. K3b will run without them but major " "functions (for example CD writing!) will be disabled.K3b Setup tries " "to find the executables. You can change the paths manually if you want other " "versions to be used, or K3b Setup did not find your installation." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:351 option/k3bexternalbinoptiontab.cpp:36 msgid "Found" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:352 option/k3bexternalbinoptiontab.cpp:37 msgid "Program" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:353 option/k3bexternalbinoptiontab.cpp:38 msgid "Version" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:354 option/k3bexternalbinoptiontab.cpp:39 #: rip/k3bripperwidget.cpp:93 msgid "Path" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:360 msgid "Find Program" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:415 msgid "" "K3bSetup was unable to find cdrecord. You will not " "be able to write CDs or get information about your CD drives without it. It " "is highly recommended to install cdrecord." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:457 msgid "Please Select %1 Executable" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:471 msgid "Setup Some Necessary Permissions for K3b" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:482 msgid "" "The external programs need to be run as root, since they need write " "access to the CD drives and to run with higher priority. K3b also needs " "write access to the CD drives (for extended functionality like detecting the " "capacity of a CD).If you know what you are doing you can skip this " "and setup the permissions for yourself. However, it is recommended to let " "K3bSetup make the changes (To learn more about what K3b Setup will do press " "Details).Please specify the users that will use K3b. You can " "also specify an alternative group name. If you do not know what that means " "just use the default." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:493 msgid "K3b Users" msgstr "K3b使用者" #: k3bsetup/k3bsetupwizardtabs.cpp:503 msgid "Remove User" msgstr "移除使用者" #: k3bsetup/k3bsetupwizardtabs.cpp:504 msgid "Add User..." msgstr "加入使用者..." #: k3bsetup/k3bsetupwizardtabs.cpp:513 msgid "Let K3b setup make the required changes for the devices" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:517 msgid "Let K3b setup make the required changes for the external programs" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:530 msgid "Details" msgstr "細節" #: k3bsetup/k3bsetupwizardtabs.cpp:534 msgid "CD Writing Group" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:589 msgid "Please specify a CD writing group." msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:589 msgid "Missing Group Name" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:594 msgid "" "You did not specify any users. Only root will be able to write CDs. Continue?" msgstr "" "您沒有指定任何的使用者.只有root能燒錄CD.繼續嗎?" #: k3bsetup/k3bsetupwizardtabs.cpp:599 msgid "" "You chose not to change device permissions. K3b will not be able to provide " "extended features like detection of writer capabilities. Continue?" msgstr "" "您選擇不要改變裝置權限. K3b將無法提供像燒錄機功能偵測這類延伸的功能." "繼續嗎?" #: k3bsetup/k3bsetupwizardtabs.cpp:612 msgid "Please enter a user name:" msgstr "請輸入使用者名稱:" #: k3bsetup/k3bsetupwizardtabs.cpp:621 msgid "Not a valid user name. Please enter a user name:" msgstr "這不是一個有效的使用者名稱.請輸入使用者名稱:" #: k3bsetup/k3bsetupwizardtabs.cpp:639 msgid "" "These are the permission changes K3b Setup will perform and why:\n" "<table>\n" "<tr>\n" " <td>change permission for cdrecord, mksiofs, and cdrdao to 4710</td>\n" " <td>cdrecord and cdrdao require write access to all the CD drives and have " "all three programs run with higher priority. That is why they need to be run " "as root.</td>\n" "</tr>\n" "<tr>\n" " <td>add cdrecord, mkisofs, and cdrdao to group 'cdrecording'</td>\n" " <td>not everybody should be allowed to execute these programs since running " "a program as suid root is always a security risk.</td>\n" "</tr>\n" "<tr>\n" " <td>add the selected users to group 'cdrecording'</td>\n" " <td>these users will be able to run cdrecord, mkisofs, and cdrdao</td>\n" "</tr>\n" "<tr>\n" " <td>change permission for all detected SCSI drives to 660</td>\n" " <td>K3b requires write access to the SCSI CD drives in order to detect " "writing speed, for example</td>\n" "</tr>\n" "<tr>\n" " <td>change permission for all detected ATAPI drives to 620</td>\n" " <td>K3b only requires read access to the ATAPI drives since it is not (yet) " "able to detect speed and other parameters for ATAPI devices.</td>\n" "</tr>\n" "<tr>\n" " <td>add all detected devices to group 'cdrecording'</td>\n" " <td>since write access to devices is always a security risk (although one " "cannot do much harm with writing to a CD device), only the selected users " "will be able to access the drives</td>\n" "</tr>\n" "</table>" msgstr "" #: k3bsetup/k3bsetupwizardtabs.cpp:671 msgid "K3b Setup Permission Details" msgstr "K3b Setup 權限細節" #: k3bsetup/k3bsetupwizardtabs.cpp:683 msgid "Save Your Settings" msgstr "儲存您的設定" #: k3bsetup/k3bsetupwizardtabs.cpp:693 msgid "" "<h1>Congratulations.</h1>You have completed the K3b Setup. Just click the " "Finish button to save your changes and then enjoy the ease of CD writing " "with Linux/KDE." msgstr "" "<h1>恭喜.</h1>你已經完成K3b Setup.請按下完成按鈕來儲存您已改變的設定" "然後就可以享受在Linux/KDE下燒錄CD的便利了" #: k3bsetup/k3bsetupwizardtabs.cpp:704 msgid "Setting" msgstr "設定" #: k3bsetup/k3bsetupwizardtabs.cpp:705 msgid "Value" msgstr "" #: k3bsetup/main.cpp:31 k3bsetup/main.cpp:45 msgid "K3bSetup" msgstr "" #: k3bsetup/main.cpp:56 msgid "K3b Setup must be run as root!" msgstr "K3b Setup必須以root身份執行" #: rc.cpp:1 msgid "&Project" msgstr "" #: option/k3bburningoptiontab.cpp:56 msgid "Audio Project" msgstr "" #: option/k3bburningoptiontab.cpp:68 msgid "Default pregap:" msgstr "" #: option/k3bburningoptiontab.cpp:84 msgid "Data Project" msgstr "" #: option/k3bburningoptiontab.cpp:88 msgid "Use audio tags for filenames" msgstr "" #: option/k3bburningoptiontab.cpp:89 msgid "Discard identical names" msgstr "" #: option/k3bburningoptiontab.cpp:90 msgid "List hidden files" msgstr "列出隱藏檔案" #: option/k3bburningoptiontab.cpp:91 msgid "List system files" msgstr "列出系統檔案" #: option/k3bburningoptiontab.cpp:96 msgid "Default CD Size" msgstr "預設CD大小" #: option/k3bburningoptiontab.cpp:104 option/k3bburningoptiontab.cpp:105 #: option/k3bburningoptiontab.cpp:106 msgid "%1 minutes (%2 MB)" msgstr "%1 分 (%2 MB)" #: option/k3bburningoptiontab.cpp:107 msgid "Custom:" msgstr "" #: option/k3bburningoptiontab.cpp:117 msgid "minutes" msgstr "分" #: option/k3bburningoptiontab.cpp:146 msgid "Do not eject CD after write process" msgstr "在燒錄過程完後不要退出CD" #: option/k3bburningoptiontab.cpp:147 msgid "Allow overburning (not supported by cdrecord <= 1.10)" msgstr "" #: option/k3bburningoptiontab.cpp:148 msgid "Manual writing buffer size" msgstr "" #: option/k3bburningoptiontab.cpp:159 msgid "MB" msgstr "" #: option/k3bburningoptiontab.cpp:160 msgid "blocks" msgstr "" #: option/k3bburningoptiontab.cpp:164 msgid "Manual writing application selection" msgstr "" #: option/k3bburningoptiontab.cpp:187 msgid "Projects" msgstr "專案" #: option/k3bburningoptiontab.cpp:191 msgid "Add hidden files in subdirectories" msgstr "" #: option/k3bburningoptiontab.cpp:192 msgid "Add system files in subdirectories" msgstr "" #: option/k3bburningoptiontab.cpp:194 msgid "" "If this option is checked, hidden files in directories added to a data " "project will also be added." msgstr "" #: option/k3bburningoptiontab.cpp:197 msgid "" "If this option is checked, system files (fifos, devices, sockets) in " "directories added to a data project will also be added." msgstr "" #: option/k3bcddbemptydbtab.cpp:40 msgid "all" msgstr "" #: option/k3bcddbemptydbtab.cpp:41 msgid "none" msgstr "" #: option/k3bcddblocaldbtab.cpp:64 msgid "Local Database" msgstr "" #: option/k3bcddblocaldbtab.cpp:68 msgid "File to save CDDB entries of ripped 'wav' files." msgstr "" #: option/k3bcddblocaldbtab.cpp:77 msgid "Database Handling" msgstr "" #: option/k3bcddblocaldbtab.cpp:85 msgid "Log" msgstr "" #: option/k3bcddblocaldbtab.cpp:87 msgid "Verify" msgstr "" #: option/k3bcddblocaldbtab.cpp:88 msgid "Find" msgstr "" #: option/k3bcddblocaldbtab.cpp:113 rip/k3bdvdripperwidget.cpp:178 #: rip/k3bripperwidget.cpp:278 msgid "Select Ripping Directory" msgstr "" #: option/k3bcddblocaldbtab.cpp:141 msgid "Database Error" msgstr "資料庫錯誤" #: option/k3bcddblocaldbtab.cpp:142 msgid "File does not exist <%1>." msgstr "檔案不存在 <%1>" #: option/k3bdeviceoptiontab.cpp:30 msgid "" "K3b tries to detect all your devices properly. You can add devices that have " "not been detected and change the cdrdao driver for the generic SCSI drives. " "If K3b is unable to detect your drive, run K3bSetup to set the correct " "permissions." msgstr "" "K3b試著去正確地偵測您的裝置.你可以加入沒被偵測到的裝置和改變cdrdao的通用SCSI" "裝置的驅動程式.如果K3b無法偵測到你的裝置.請執行K3bSetup來設定正確的權限." #: option/k3bexternalbinoptiontab.cpp:40 msgid "Additional Parameters" msgstr "" #: option/k3bexternalbinoptiontab.cpp:53 msgid "Search" msgstr "尋找" #: option/k3bexternalbinoptiontab.cpp:58 msgid "" "Specify the paths to the external programs that K3b needs to work properly, " "or press \"Search\" to let K3b search for the programs." msgstr "" #: option/k3bmiscoptiontab.cpp:41 msgid "Show splash screen" msgstr "" #: option/k3bmiscoptiontab.cpp:42 msgid "Show progress in system tray" msgstr "" #: option/k3bmiscoptiontab.cpp:44 msgid "Default Temporary Directory" msgstr "預設暫存目錄" #: option/k3bmiscoptiontab.cpp:98 msgid "Directory does not exist. Create?" msgstr "此目錄不存在,要建立嗎?" #: option/k3bmiscoptiontab.cpp:99 msgid "Create Directory" msgstr "建立目錄" #: option/k3bmiscoptiontab.cpp:101 msgid "" "Unable to create directory\n" "(%1)" msgstr "" "無法建立目錄\n" "(%1)" #: option/k3bmiscoptiontab.cpp:112 msgid "" "You specified a file for the temporary directory. K3b will use its base path " "as the temporary directory." msgstr "" #: option/k3bmiscoptiontab.cpp:112 msgid "Don't show again." msgstr "不要再顯示" #: option/k3bmiscoptiontab.cpp:118 #, c-format msgid "You don't have permission to write to %1." msgstr "" #: option/k3boptiondialog.cpp:119 msgid "Writing Settings" msgstr "" #: option/k3boptiondialog.cpp:133 msgid "Programs" msgstr "" #: option/k3boptiondialog.cpp:133 msgid "Setup External Programs" msgstr "" #: option/k3boptiondialog.cpp:147 rip/k3bcdview.cpp:181 rip/k3bcdview.cpp:243 #: rip/k3bcdview.cpp:247 msgid "CDDB" msgstr "" #: option/k3boptiondialog.cpp:147 msgid "Setup the CDDB Server" msgstr "" #: option/k3boptiondialog.cpp:165 msgid "Devices" msgstr "" #: option/k3boptiondialog.cpp:178 msgid "CD Ripping" msgstr "" #: option/k3boptiondialog.cpp:178 msgid "Setup Audio CD Ripping Patterns" msgstr "" #: option/k3boptiondialog.cpp:192 msgid "Misc" msgstr "" #: option/k3boptiondialog.cpp:192 msgid "Miscellaneous Settings" msgstr "" #: option/k3bpatternoptiontab.cpp:88 option/k3bpatternoptiontab.cpp:91 #: option/k3bpatternoptiontab.cpp:324 msgid "Album" msgstr "" #: option/k3bpatternoptiontab.cpp:89 option/k3bpatternoptiontab.cpp:92 #: option/k3bpatternoptiontab.cpp:96 option/k3bpatternoptiontab.cpp:101 #: option/k3bpatternoptiontab.cpp:106 option/k3bpatternoptiontab.cpp:322 #: rip/k3bcdview.cpp:94 msgid "Artist" msgstr "" #: option/k3bpatternoptiontab.cpp:95 option/k3bpatternoptiontab.cpp:100 #: option/k3bpatternoptiontab.cpp:105 option/k3bpatternoptiontab.cpp:320 #: rip/k3bcdview.cpp:95 msgid "Title" msgstr "標題" #: option/k3bpatternoptiontab.cpp:97 option/k3bpatternoptiontab.cpp:102 #: option/k3bpatternoptiontab.cpp:107 option/k3bpatternoptiontab.cpp:326 msgid "Track Number" msgstr "" #: rip/k3bcddacopy.cpp:64 msgid "Reading Digital Audio" msgstr "" #: rip/k3bcddacopy.cpp:65 msgid "Retrieving information about disk" msgstr "擷取關於碟片的資訊" #: rip/k3bcddacopy.cpp:109 msgid "to " msgstr "到" #: rip/k3bcddacopy.cpp:114 rip/k3bdvdripperwidget.cpp:235 #, c-format msgid "Unable to create directory %1" msgstr "無法建立目錄 %1" #: rip/k3bcddacopy.cpp:124 #, c-format msgid "Unable to rip to: %1" msgstr "" #: rip/k3bcddacopy.cpp:134 #, c-format msgid "Unable to read track %1" msgstr "無法讀取軌道 %1" #: rip/k3bcddacopy.cpp:176 msgid "Successfully read all tracks" msgstr "成功地讀取所有的軌道" #: rip/k3bcddacopy.cpp:182 msgid "Canceled by user" msgstr "使用者取消" #: rip/k3bcddacopy.cpp:185 msgid "Unable to delete part of copied file" msgstr "" #: rip/k3bcddacopy.cpp:190 #, c-format msgid "Error while ripping track %1" msgstr "" #: rip/k3bcddacopy.cpp:239 rip/k3bcdview.cpp:145 rip/k3bripperwidget.cpp:263 #, c-format msgid "Track%1" msgstr "軌道%1" #: rip/k3bcdview.cpp:96 rip/k3bmovieview.cpp:78 msgid "Time" msgstr "時間" #: rip/k3bcdview.cpp:99 msgid "Extended info" msgstr "" #: rip/k3bcdview.cpp:153 msgid "" "Audio CD\n" "%1 minutes" msgstr "" #: rip/k3bcdview.cpp:181 rip/k3bcdview.cpp:243 rip/k3bcdview.cpp:247 msgid "No CDDB entry found" msgstr "" #: rip/k3bcdview.cpp:256 rip/k3bdvdripperwidget.cpp:235 #: rip/k3bdvdrippingprocess.cpp:301 rip/k3bdvdrippingprocess.cpp:313 #: rip/k3bdvdrippingprocess.cpp:373 msgid "Ripping Error" msgstr "" #: rip/k3bcdview.cpp:256 msgid "Please select the title to rip." msgstr "" #: rip/k3bdvdcopy.cpp:62 msgid "Copy DVD." msgstr "" #: rip/k3bdvdextraripstatus.cpp:44 msgid "Data rate: " msgstr "資料速率: " #: rip/k3bdvdextraripstatus.cpp:46 msgid "Estimated time: " msgstr "預計時間: " #: rip/k3bdvdfilldisplay.cpp:70 rip/k3bdvdfilldisplay.cpp:73 msgid "(full)" msgstr "" #: rip/k3bdvdripperwidget.cpp:58 msgid "Ripping DVD" msgstr "" #: rip/k3bdvdripperwidget.cpp:83 msgid "Destination Directory" msgstr "" #: rip/k3bdvdripperwidget.cpp:101 msgid "Open encoding dialog after ripping." msgstr "" #: rip/k3bdvdripperwidget.cpp:102 msgid "Start encoding with default settings after ripping." msgstr "" #: rip/k3bdvdripperwidget.cpp:108 msgid "Available Space" msgstr "可用空間" #: rip/k3bdvdripperwidget.cpp:124 rip/k3bripperwidget.cpp:132 msgid "Start Ripping" msgstr "" #: rip/k3bdvdripperwidget.cpp:124 msgid "This starts the DVD copy." msgstr "" #: rip/k3bdvdripperwidget.cpp:151 msgid "Ripping process" msgstr "" #: rip/k3bdvdripperwidget.cpp:336 videoEncoding/k3bdivxdirectories.cpp:196 #, c-format msgid "Error while parsing file: %1" msgstr "" #: rip/k3bdvdripperwidget.cpp:336 videoEncoding/k3bdivxdirectories.cpp:196 msgid "Error loading project" msgstr "" #: rip/k3bdvdrippingprocess.cpp:301 msgid "%1 already exists." msgstr "%1 已經存在" #: rip/k3bdvdrippingprocess.cpp:301 rip/k3bdvdrippingprocess.cpp:313 msgid "Overwrite" msgstr "覆蓋" #: rip/k3bdvdrippingprocess.cpp:313 msgid "Log file already exists." msgstr "" #: rip/k3bdvdrippingprocess.cpp:373 msgid "Unable to get data for audio normalizing. Use default of 1.0." msgstr "" #: rip/k3bmovieview.cpp:77 msgid "Titles" msgstr "標題" #: rip/k3bmovieview.cpp:79 msgid "Language(s)" msgstr "" #: rip/k3bmovieview.cpp:80 msgid "Chapter(s)" msgstr "" #: rip/k3bmovieview.cpp:81 msgid "Angle(s)" msgstr "" #: rip/k3bmovieview.cpp:113 msgid "Please wait..." msgstr "請稍待..." #: rip/k3bmovieview.cpp:120 msgid "K3b is fetching information about title " msgstr "" #: rip/k3bmovieview.cpp:163 #, c-format msgid "Titleset %1" msgstr "標題集 %1" #: rip/k3bmovieview.cpp:174 #, c-format msgid "Title %1" msgstr "標題 %1" #: rip/k3bmovieview.cpp:228 msgid "" "Title %1 (Angle(s) %2)\n" "Moviedata - TV Norm: %3, Time: %4 hours, Frames: %5, FPS: %6\n" "Moviedata - Aspect Ratio %7 %8" msgstr "" #: rip/k3bripperwidget.cpp:66 msgid "Ripping CD" msgstr "" #: rip/k3bripperwidget.cpp:91 msgid "File Size" msgstr "檔案大小" #: rip/k3bripperwidget.cpp:102 msgid "Destination Base Directory" msgstr "" #: rip/k3bripperwidget.cpp:108 msgid "Use directory and filename pattern" msgstr "" #: rip/k3bripperwidget.cpp:121 msgid "File Type" msgstr "檔案型態" #: rip/k3bripperwidget.cpp:122 msgid "Wave" msgstr "" #: rip/k3bripperwidget.cpp:123 msgid "MP3" msgstr "" #: rip/k3bripperwidget.cpp:124 msgid "Ogg Vorbis" msgstr "" #: rip/k3bripperwidget.cpp:132 msgid "Starts copying the selected tracks" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:45 msgid "Extended Audio/Video Settings" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:51 msgid "Keyframes:" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:52 msgid "" "Keyframes (same as I-frames) are \"full\" pictures of an MPEG-stream. They " "are similar to a simple JPEG and have the best quality in a video. All " "pictures following are only stored as differences to a keyframe. Here you " "can set the maximum distance between two keyframes. In most cases this will " "rarely be used, as the codec will automatically insert a keyframe on each " "scene change. Default is 300." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:56 msgid "Crispness:" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:57 #, c-format msgid "" "Here you can smooth the video during the encoding process. It is better to " "leave crispness at 100% for encoding and smooth the video during playback " "instead." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:61 msgid "Audio language:" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:62 msgid "" "Select the language and the surround mode. Typically there are \"MPEG2 Stereo" "\", \"AC3 2ch and 6ch\" and \"DTS 6ch\". You can probably choose AC3 6ch, " "AC3 2ch and MPEG2 Stereo in descending order, depending on your language (It " "doesn't matter if DTS works or not, you can still try it)." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:65 msgid "Deinterlace mode:" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:66 msgid "" "Select a deinterlace mode if you have interlaced material. \"Fast\" is the " "standard deinterlace mode, \"Encoder Based\" uses the internal deinterlace " "of the codec (be aware that some codecs may have no deinterlacer), \"Zoom to " "Full Frame\" no matter how it works but it is rather good and slow. Use this " "if \"Fast\" still produces interlace stripes or color artifacts (red shadow, " "etc.), \"Drop Field/Half Height\" uses only one field and scales it." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:85 msgid "Resample to 44.1 kHz" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:86 msgid "" "If this is checked, the audio track will be downsampled from 48 kHz to 44.1 " "kHz. Useful because some soundcards have problems with a sampling rate of 48 " "kHz." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:88 msgid "Use YUV colorspace." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:89 msgid "" "If this is checked, the internal codec works with the YUV colorspace instead " "of using RGB. Useful because DVD also has YUV colorspace and it is twice " "fast as RGB. You only need RGB colorspace if a filter needs it (filters not " "yet supported)." msgstr "" #: videoEncoding/k3bdivxavextend.cpp:92 msgid "0 - None" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:93 msgid "1 - Fast" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:94 msgid "2 - Encoder Based" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:95 msgid "3 - Zoom to Full Frame" msgstr "" #: videoEncoding/k3bdivxavextend.cpp:96 msgid "4 - Drop Field/Half Height" msgstr "" #: videoEncoding/k3bdivxavset.cpp:52 msgid "Basic Audio/Video Settings" msgstr "" #: videoEncoding/k3bdivxavset.cpp:58 msgid "CDs:" msgstr "" #: videoEncoding/k3bdivxavset.cpp:59 msgid "" "Select how many CDs the final encoded video should have. You can select CDRs " "with a size of 650MB and 700MB." msgstr "" #: videoEncoding/k3bdivxavset.cpp:61 msgid "MP3 Bitrate:" msgstr "" #: videoEncoding/k3bdivxavset.cpp:62 msgid "" "Select bitrate of the audio track. MP3 can be encoded with constant or " "variable bitrate and joint stereo. AC3 passthrough must be disabled to use " "MP3." msgstr "" #: videoEncoding/k3bdivxavset.cpp:64 msgid "Video codec:" msgstr "" #: videoEncoding/k3bdivxavset.cpp:68 msgid "" "Select the video codec to encode to the final movie. XviD (www.xvid.org) is " "an Open Source codec and has similar features to DivX5. DivX4 is the " "predecessor to DivX5. All three codecs support 1-pass and 2-pass encoding. " "XviD (CVS) is support for the latest nightly snapshots of XviD. Regarding " "quality, try all the different codecs to find out which you prefer. " "Secondly, read the various forums about MPEG-4 Encoding (www.doom9.org, www." "xvid.org, www.divx.net, ... ). The difference between a DivX4 and XviD 2-" "pass encoded movie is quite small. Sometimes DivX4 (smoother) is better and " "other times XviD (sharper). If the encoding process crashes then you " "probably haven't used the codec you have installed. Due to the codec " "libraries having the same name, you can only use DivX4 or DivX5 and XviD or " "XviD (CVS). This will be fixed in a future version, so the codecs will auto-" "detect and can be used with different install locations." msgstr "" #: videoEncoding/k3bdivxavset.cpp:78 msgid "Codec mode:" msgstr "" #: videoEncoding/k3bdivxavset.cpp:79 msgid "" "Select the mode for video encoding. 1-pass encoding has lower quality than 2-" "pass, but requires half the time to encode a video. In 2-pass mode the video " "will be encoded twice. The first time, the video will only be analyzed to " "get the best quality in the second encoding pass." msgstr "" #: videoEncoding/k3bdivxavset.cpp:82 msgid "Bitrate: " msgstr "" #: videoEncoding/k3bdivxavset.cpp:86 msgid "1 x 650 MB" msgstr "" #: videoEncoding/k3bdivxavset.cpp:87 msgid "1 x 700 MB" msgstr "" #: videoEncoding/k3bdivxavset.cpp:88 msgid "2 x 650 MB" msgstr "" #: videoEncoding/k3bdivxavset.cpp:89 msgid "2 x 700 MB" msgstr "" #: videoEncoding/k3bdivxavset.cpp:90 msgid "1 x 705 MB" msgstr "" #: videoEncoding/k3bdivxavset.cpp:91 msgid "1 x 716 MB" msgstr "" #: videoEncoding/k3bdivxavset.cpp:94 msgid "AC3 pass-through mode" msgstr "" #: videoEncoding/k3bdivxavset.cpp:95 msgid "Enable this if you want the orginal digital sound (AC3)." msgstr "" #: videoEncoding/k3bdivxavset.cpp:100 msgid " 64 kbits" msgstr "" #: videoEncoding/k3bdivxavset.cpp:101 msgid " 96 kbits" msgstr "" #: videoEncoding/k3bdivxavset.cpp:102 msgid "112 kbits" msgstr "" #: videoEncoding/k3bdivxavset.cpp:103 msgid "128 kbits" msgstr "" #: videoEncoding/k3bdivxavset.cpp:104 msgid "160 kbits" msgstr "" #: videoEncoding/k3bdivxavset.cpp:105 msgid "192 kbits" msgstr "" #: videoEncoding/k3bdivxavset.cpp:118 msgid "1-pass" msgstr "" #: videoEncoding/k3bdivxavset.cpp:119 msgid "2-pass" msgstr "" #: videoEncoding/k3bdivxavset.cpp:127 msgid "" "_: Constant Bitrate\n" "CBR" msgstr "" #: videoEncoding/k3bdivxavset.cpp:128 msgid "" "_: Variable Bitrate\n" "VBR" msgstr "" #: videoEncoding/k3bdivxavset.cpp:131 msgid "" "If set to CBR the MP3 encoding is done with a constant bitrate. If set to " "VBR then a variable bitrate is used. Typically a variable bitrate gets " "better quality but is often out of sync. You should try it first with some " "test encodings." msgstr "" #: videoEncoding/k3bdivxavset.cpp:187 msgid "%1 kbits" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:59 msgid "Cropping Settings" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:67 msgid "" "Preview picture of the video to crop it properly. The colors and quality are " "not the final state, so use this picture only to cut off black borders." msgstr "" #: videoEncoding/k3bdivxcrop.cpp:71 msgid "" "Step through the video to find a light picture to do a proper cut of the " "black bars." msgstr "" #: videoEncoding/k3bdivxcrop.cpp:72 msgid "Resize mode" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:74 msgid "Fast (-B)" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:75 msgid "Exact (-Z)" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:76 msgid "" "\"Fast\" resizing is much faster than \"Exact\" resizing, but is limited to " "a resize step multiple of 8 pixels." msgstr "" #: videoEncoding/k3bdivxcrop.cpp:84 msgid "Crop parameters" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:89 msgid "Cut off the black borders of the movie" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:92 msgid "Automatically crop" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:107 msgid "Final video" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:109 videoEncoding/k3bdivxinfo.cpp:50 #: videoEncoding/k3bdivxresize.cpp:76 msgid "Aspect ratio:" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:110 msgid "Video quality:" msgstr "" #: videoEncoding/k3bdivxcrop.cpp:120 msgid "" "This is the final size of the movie. Verify that the final size of your " "movie has the right aspect ratio: 1:1.333 for a 4:3 movie, 1:1.77 for a 16:9 " "movie, and 1:2.35 for a letterbox movie. If you are using cropping, you can " "ignore the aspect ratio error shown in the resizing box. The \"Video quality" "\" is a value to estimate the final video quality. (The value is calculated " "as \"<video bitrate>/(<framerate>*<height>*<width>)\". You may know this " "from GordianKnot (www.doom9.net)). The higher the value the better the " "quality.\n" "The following values are adequate if the movies on viewed on a television. " "Values greater than 0.15 are adequate for letterbox movies. For 16:9 you " "should use values greater than 0.16 and for 4:3, use greater than 0.17-0.18. " "Experiment with different values to see what you prefer." msgstr "" #: videoEncoding/k3bdivxdirectories.cpp:51 msgid "Source/Destination Directories" msgstr "" #: videoEncoding/k3bdivxdirectories.cpp:56 msgid "K3b DVD ripping file:" msgstr "" #: videoEncoding/k3bdivxdirectories.cpp:62 msgid "External audio file:" msgstr "" #: videoEncoding/k3bdivxdirectories.cpp:68 msgid "Final AVI file name:" msgstr "" #: videoEncoding/k3bdivxdirectories.cpp:137 msgid "Select project file" msgstr "" #: videoEncoding/k3bdivxdirectories.cpp:144 msgid "Save video as" msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:45 msgid "Copy IFO files to vob directory." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:48 msgid "Disable audio normalizing" msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:86 msgid "Preprocessing audio" msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:87 msgid "Search for maximum audio gain to get normalized parameter." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:160 msgid "Start first pass of video encoding." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:161 msgid "Encoding video (Pass 1)" msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:163 msgid "Start second pass of video encoding." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:164 msgid "Encoding video (Pass 2)" msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:166 msgid "Start video encoding." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:167 msgid "Encoding video" msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:235 msgid "Video generation aborted by user." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:246 msgid "Video generating successful finished." msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:270 msgid "Gain for normalizing is: " msgstr "" #: videoEncoding/k3bdivxencodingprocess.cpp:285 msgid "Preprocessing audio completed." msgstr "" #: videoEncoding/k3bdivxinfo.cpp:40 msgid "DVD Information" msgstr "" #: videoEncoding/k3bdivxinfo.cpp:46 msgid "Play length:" msgstr "" #: videoEncoding/k3bdivxinfo.cpp:47 msgid "Frames:" msgstr "" #: videoEncoding/k3bdivxinfo.cpp:48 msgid "Framerate:" msgstr "" #: videoEncoding/k3bdivxinfo.cpp:49 msgid "Video size:" msgstr "" #: videoEncoding/k3bdivxinfo.cpp:51 msgid "TV norm:" msgstr "" #: videoEncoding/k3bdivxresize.cpp:45 msgid "Resizing" msgstr "" #: videoEncoding/k3bdivxresize.cpp:50 msgid "Resize:" msgstr "" #: videoEncoding/k3bdivxresize.cpp:57 msgid "" "Resizes the final output video depending on the aspect ratio of the movie. " "Before resizing the video the image should already be cropped, so it can be " "used to detect the real aspect ratio of the movie. If the aspect ratio is " "not properly detected you must correct the height of the video to fit it." msgstr "" #: videoEncoding/k3bdivxresize.cpp:64 msgid "" "The aspect ratio error shows the difference from the original aspect ratio. " "If cropping is used, the apsect ratio error shows the difference from the " "\"best match\" aspect ratio (i.e. 4:3, 16:9 or letterbox 1:2.35). To correct " "the aspect ratio manually change the height." msgstr "" #: videoEncoding/k3bdivxresize.cpp:67 msgid "Width:" msgstr "" #: videoEncoding/k3bdivxresize.cpp:69 msgid "Height:" msgstr "" #: videoEncoding/k3bdivxresize.cpp:79 msgid "Aspect ratio error:" msgstr "" #: videoEncoding/k3bdivxsizetab.cpp:76 msgid "" "You must load a K3b DVD Project file and \n" " set a file name for the final AVI." msgstr "" #: videoEncoding/k3bdivxview.cpp:42 videoEncoding/k3bdivxview.cpp:53 msgid "Encoding Video" msgstr "" #: videoEncoding/k3bdivxview.cpp:43 videoEncoding/k3bdivxview.cpp:54 msgid "Encode" msgstr "" #: videoEncoding/k3bdivxview.cpp:43 videoEncoding/k3bdivxview.cpp:54 msgid "Start encoding" msgstr "" #: videoEncoding/k3bdivxview.cpp:68 msgid "Basic Audio/Video settings" msgstr "" #: videoEncoding/k3bdivxview.cpp:72 msgid "Advanced Audio/Video settings" msgstr "" #: videoEncoding/k3bdivxextsettings.cpp:40 videoEncoding/k3bdivxview.cpp:76 msgid "Expert settings" msgstr "專家設定" #: videoEncoding/k3bdivxview.cpp:103 msgid "You must choose a filename for the final video." msgstr "" #: videoEncoding/k3bdivxview.cpp:103 videoEncoding/k3bdivxview.cpp:107 msgid "Settings Error" msgstr "設定錯誤" #: videoEncoding/k3bdivxview.cpp:107 msgid "File <%1> already exists. Do you want to overwrite it?" msgstr "檔案 <%1> 已經存在.您想要覆蓋它嗎?" #: videoEncoding/k3bdivxview.cpp:130 msgid "Encoding process" msgstr "" #: videoEncoding/k3bdivxextsettings.cpp:46 msgid "Shutdown after encoding process finished" msgstr "" #: videoEncoding/k3bdivxextsettings.cpp:47 msgid "" "If enabled, K3b shuts the system down after encoding has finished. The " "shutdown command must be setuid to use it as normal user." msgstr "" #: videoEncoding/k3bdivxextsettings.cpp:50 msgid "Start encoding without detecting normalize parameter for audio." msgstr "" #: videoEncoding/k3bdivxextsettings.cpp:51 msgid "Do only the first pass of a two-pass encoding." msgstr "" #: videoEncoding/k3bdivxextsettings.cpp:52 msgid "Do only the second pass of a two-pass encoding." msgstr "" #: k3bisooptions.cpp:9 msgid "" "_: Project name\n" "Data" msgstr "" #: mixed/k3bmixeddoc.cpp:27 msgid "" "_: Project name\n" "Mixed" msgstr "" #: mixed/k3bmixedview.cpp:42 msgid "Audio Tracks" msgstr "" #: mixed/k3bmixedburndialog.cpp:54 msgid "Data Settings" msgstr "資料設定" #: _translatorinfo.cpp:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" "戴上為" #: _translatorinfo.cpp:3 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" "siongui(a)yahoo.com.tw"

21 years, 11 months

Re: [Zh-l10n] K3b po檔~

by informer.bbs＠bbs.sayya.org

※ 引述《informer(a)m2000.idv.tw (Pofeng Lee)》之銘言： > On Thu, 19 Sep 2002, Yuan-Chen Cheng wrote: >> 另外, 這種情形我並不知道有沒有方法可以把兩個 po 在這樣的情形下做比較好的 >> merge (a.pot 有 a1.po 與 a2.po, 將 a1.po + a2.po => a.po) >> 如果有朋友有方法處理的話, 敬請伸出援手. > would u plz give me ann example ? > "xmerge" may be helpful 我頭暈, 是 msgmerge 啦 :p -- [1;32m※ Origin: [33mSayYA 資訊站 [37m<bbs.sayya.org> [m [1;31m◆ From: [36m211.22.103.103[m

21 years, 11 months

[Zh-l10n] po 檔更新 4

by Chao-Hsiung Liao

更新 kpersonalizer.po ksysguard.po -- by Chao-Hsiung Liao

21 years, 11 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Zh-l10n-2002 September 2002